The Camaro Club (UK)
https://classiccamaroclub.mfatw.com/

Newbie
https://classiccamaroclub.mfatw.com/viewtopic.php?f=4&t=4643		 Page 1 of 2
Author:  paul garnett [Mon Aug 24, 2015 9:17 am ]
Post subject:  Newbie
Hi guys,

another newbie for you! just got myself a 79 Z28, I imported it from Indiana, runs ok but needs a lot of love! body is rust free with the execption of a tiny hole in the boot!

I will do a full interior refit including all kick panels headliner etc, basically a brand new interior, not cheap i know but the sun has destroyed it.

Also it seems to have "lost" all its heating and ventilation parts, ie no heater matrix, no ducting, no switches, you get the picture, has anybody got any laying around, i have contacted a few parts places in the states for qoutes to replace all, set myself a reasonable budget to complete it....yikes

Attachments:
camaro.jpg
camaro.jpg [135.92KiB |Viewed 1971 times ]
Author:  78 Camaro [Mon Aug 24, 2015 10:12 am ]
Post subject:  Re: Newbie
That looks very nice and original!

For the heating stuff / interior panels try rockauto and npd (national parts depo). Rockauto you'll probably find a lot more pocket friendly on things like the heater matrix. I think the kick panels are about £45 for each side.
Author:  paul garnett [Mon Aug 24, 2015 11:00 am ]
Post subject:  Re: Newbie
Thanks for the info, I made a list of most things i will need so far, will send them an email and see if theres a deal to be done..

It is all original looking, looking forward to getting it on the road.
Author:  chevy-stu [Mon Aug 24, 2015 12:55 pm ]
Post subject:  Re: Newbie
Hello and welcome... :wave:

Looks like a nice original car too..

There wer a few cars being broken a while back, and a bit of an eBay search may find some 2nd hand interior or heater parts around, but failing that NPD or Classic Industries...

Looking forward to more update pics..
Author:  paul garnett [Mon Aug 24, 2015 6:53 pm ]
Post subject:  Re: Newbie
Cheers guys,

Will go and check them out, although will go with a new matrix and blower motor..
Author:  paul garnett [Sat Aug 29, 2015 6:48 pm ]
Post subject:  Re: Newbie
Couple more photos its clean underneath, will have to get plenty of underseal on if I want to enjoy it, and not worry about rain, or salt!!!

Attachments:
cam underside.JPG
cam underside.JPG [346.01KiB |Viewed 1926 times ]
camero underside 1.JPG
camero underside 1.JPG [340.35KiB |Viewed 1926 times ]
Author:  78 Camaro [Sun Aug 30, 2015 11:28 am ]
Post subject:  Re: Newbie
The looks lovely and clean underneath!

Underseal kept mine nice and solid too, worth doing it as you say if it's going to be driven :thumbup:

It looks like the rear sway bar could use a new bushing. Find out the diameter of the bar with a a caliper gauge, then see if you can find a supplier that does generic ones, and match the size up.

Cheers!

Ray
Author:  paul garnett [Sun Aug 30, 2015 2:48 pm ]
Post subject:  Re: Newbie
Attachment:
IMG_20150830_131424.jpg
IMG_20150830_131424.jpg [764KiB |Viewed 1919 times ]
Yes I will replace them, looks similar to landrover stuff!!
I removed the inner wings today and the aircon rad housing, its all solid and clean, and everything just unscrews, such a nice change from fighting with rusted solid parts...
Author:  paul garnett [Sun Aug 30, 2015 3:01 pm ]
Post subject:  Re: Newbie
More pics
Author:  paul garnett [Sun May 22, 2016 10:02 am ]
Post subject:  Re: Newbie
Bit of an update guys, almost there now....interior is all brand new, well apart from front seats that will be recovered soon..

short walkaround vid..https://www.facebook.com/laurelfrear/vi ... 846619789/
Page 1 of 2 All times are UTC+01:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/