The Camaro Club (UK)

Hi All
For reluctant sale.
1970 z28 camaro, Norwood car (all metal body) with extended nose half bumpers, California import in 2003. Matt black. fitted with a N/A 454 all iron bbc (her spare engine),mech sec Holley, TH350 2600 stall 9" converter with b&m ratchet, Shortened & beefed Olds rear axle, Unknown ratio but is strong and has a spool fitted (ran 10.1 pb) aufenhauser inlet-round port 1.72 roller rockers flat tap, built buy Alders. It was fitted to the car when I bought it and has been as strong as chuff. but I have only ever had the inlet off to cure a rear inlet oil leak so unknown internals. well serviced but has a slight lifter tick. She is rarely driven, hav'nt been for a run at all this year and most of last. Almost new rear Hoosier 33x22.5 15 street legal tires on polished weld 15" rims.
Full MOT and tax. Loads of paperwork. with v5 NON transferable plates.

The Supercharged engine is all iron 454 gmc perf block and heads, large square port with open chambers 1.88 2.19 valves, Melling hv oil pump, polished rods floating pistons see pic's. Ran really strong and reliable, currently stripped getting a refresh. All std sizes no re grinds.
Here is a vid of her doing a run at pod
http://www.youtube.com/watch?v=m-tTH_z-glA[/youtube]
feel free to look at the other vid of her driving on the street and This one of the engine running
http://www.youtube.com/watch?v=uqzeUWabq8A[/youtube]
. Only run at low boost, B&M 420 MEGA blower (8-71) on B&M inlet with blow off plate polished finish. 2X750 Holley performance supercharger carbs (1500 cfm) on Sniper NOS system and plates with 2x150hp jets, all pipes and connectors all working fine with fogger full bottle. Polished 3 hole scoop. Twin Holley fuel pumps and filter at the rear of the car.

Spares
1968 Camaro Shortened rear axle complete. Strange shafts & spool unknown ratio ran one 9sec 1/4 pass fine.
Wheelie bars to fit olds axle currently on the car.
2x 15" Centerline rear alloys polished, great condition, with 31x14.0 15" Hoosier slick's nearly new.
2x 15" Centerline front runners polished, great condition, with 23.0x5.0 15" Hoosier slicks also almost new.
MSD7al-2 ignition module with some rev chips.
MSD drag only coil
MSD dissy
Holley electric fuel pump
2x bbc round port iron heads great condition, Unknown spec but can get numbers if needed
8x 454 bbc pistons, Unknown spec great condition
2x rear shocks adjustable on rose joint's
http://imageshack.us/g/833/38721730240411702191538.jpg/
http://imageshack.us/g/1/10072748/ all in a album... I hope.
I know I am forgetting loads but I will update if/when I find more. And put some pic's up
I can also deliver.
I'm after as much as I can get for the lot, in one hit rather than splitting it up. But depending on interest etc I would consider it.
£17,500 ono the lot , But like I said I'm open to offers.
Any question feel free to email or p.m. Any advice welcome
Cheers
Bill

Phwaoooaaaaarrrrrrr !!!!!!!

_________________
“You only live once, but if you do it right, once is enough.”

Tell me about it.....Shame she's got to go