The Camaro Club (UK)

Hi

I have for sale my 1968 camaro RS (No engine or gearbox), I recently imported it from America. Unfortunetly my circumstances have changed and i no longer have the time to start a new project.

The car has been striped and fully media blasted, it is a very solid car considering it is 44 years old. It has a few rusty bits but nothing major the floor appears to be solid, the rear shock panel needs to be replaced/repaired (please see pics for the bits that need some attention)
The car comes with a brand new performance Heidts front suspension (including upper and lower wishbones, coilover shocker and spring, poly bushes & Willwood front Disc brake setup (cost well over £2000+) also has edelbrock track rod arms, a brand new full wiring harness, performance bucket seats and new hood hinges. (please note that the bonnet is fibreglass and not steel) I haven’t done anything to the car since it arrived from America so I am not sure how complete it is?

The trim tag was lost during the media blasting process (not an issue as these can be replaced). The VIN plate is there and matches with the other hidden VIN numbers stamped on the firewall

The car has not been registered in the UK yet but I have all the customs paperwork and all duties & VAT have been paid.

This will make a fantastic car to someone who has the time to restore it

Any question please let me know and I will do my best to answer them.

I would like to invite offers on the car as i am not 100% sure what it would be worth

please click on the link to see the pictures http://s212.photobucket.com/albums/cc25 ... up/Camaro/

Thanks

Andrew

PM sent

_________________
Too much power...not enough hands!!

Need a friend for Evilzee?

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").

PM replied

looking for something if the price is right Ray, has to be a 1st gen though

cheers...Nige

_________________
Too much power...not enough hands!!

Awesome good luck with the negotiating! Be good to see another top-restored 1st gen

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").

Hmmm.....Do I smell a plan?
Cheers, Martin

_________________
*WARNING* The following actions have generated error codes.

Hi Mart, unfortunately not with this one, it's a bit too dear for what I'm looking for as there's a lot of aftermarket stuff on there I don't need which bumps the price up

cheers..Nige

_________________
Too much power...not enough hands!!

Yeah, but the aftermarket tat can be sold on to finance the good stuff.....
But I guess it's just a bit too pricey anyway? Pity
Cheers, Martin

_________________
*WARNING* The following actions have generated error codes.

Even after selling the stuff I don't need it's still a bit too pricey for me IMHO.

cheers..Nige

_________________
Too much power...not enough hands!!