The Camaro Club (UK)

Just joined the other night.
Glad to see so many of us who have 2nd Generation Camaro's.
I have included some images of my car for you to view.


Check out the projects section in the next day or so for some updates on what i am up to with it at the moment.
Hopefully back on the road soon!!!

Thanks Si

Hi Si, I recognise that car , so what are you doing to it at the moment??

cheers...Nige

_________________
Too much power...not enough hands!!

hello... and welcome

sure i've seen that camaro featured somewhere, what are the mods, and is that Rockingham ?

_________________
“You only live once, but if you do it right, once is enough.”

Welcome

Cool looking ride, very nice

Cheers....Tim

Thought somebody out there might recognise it!
Body mods are minor only the 4" cowl hood (fibreglass skin mounted on steel frame).
8 point cage and subframe connectors.
Engine has been prepared by Knight Racing Daventry and assembled by JEMS.
355cu in 2 bolt main block - acid dipped & true decked, stock crank balanced and oilways re drilled,fully balanced GM powdered rods, hyperutectic pistons,edlebrock performer RPM ally heads and cam kit,Performer RPM air gap intake, harland sharp roller rockers, prepared 750 cfm Holley,Moroso baffled sump ARP studs/bolts throughout.
Wheels front 8x 18" rear 8 1/2 x 20 Armano Vermont - with 235/40/zr18 and 275/30/zr20 tyres.
Brakes Baer Extreme 13" fronts and Baer pro touring 12" rears with internally mounted bias valve.
Hauser built clutch pack posi with moser shafts.
Lots of other subtle mods.

Yes you are right that is Rockingham - What a blast that photoshoot was - watch out for turn 4 it gets a bit tight

Thanks for looking.

Lovely car and nice and tastfully done...

(I've just booked a trackday at Rockingham in August funnily enough...)

_________________
“You only live once, but if you do it right, once is enough.”

Hi Simon, still got the old girl eh? (i sold you a torque converter about 6 or 7 years ago)

_________________
I KNOW WHERE YOU LIVE......



I'M JUST TOO DAMNED TIRED TO BOTHER CHASING YOU !

I remember you
Yes managed to rip all the welds out of the centre of that converter.
Must get a smaller right foot!
Just gathering parts for a T56 conversion at the moment so hopefully won't have that problem any more.
What are you driving now?

Cheers Si

How's the car coming along now Si??

cheers...Nige

_________________
Too much power...not enough hands!!

Hi Nige
Car is all back on the road now.
Have just been to Billing for the AACI show (Yes i have got the right one this time)
Will be posting up some pictures in the week.

Plenty of Camaro's at the show great to see such interest.
Would have been nice if we could have all parked up together!
Just a few minor niggles to work out on the car (Not bad after 4 1/2 years parked up)
Looks like a need to do a fluid and filter change in the gearbox as it is hanging on to each gear too long.

Cheers
Si