The Camaro Club (UK)

Any pics of the spots, or can you describe them?? Rockys plan of using matt clear would be fine also, even if you aren't using clear elsewhere. If you decide to dust it on dryly, thin the paint right down so that it lays out smooth & try a test panel first.

cheers....Nige

_________________
Too much power...not enough hands!!

good thing you said that - i was goin to use minimal thinner no more pics thatn that one, but i'll take a snap when i get home for you so you can see up close.

Cheers!

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").

And here are the spots: And a not very good quality pic after P600 blocking and first dust layer:

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").

Heres some I found bulkhead was just shot with a satin black then matt cleared, Interior was metalic medium gold with matt clear
The more coats you do gives more gloss and also you can polish it up to a desired gloss but these pics were straight from the gun
Hope this helps

_________________

Sorry for the bad pics these are quite old with my old useless camera.

_________________

Cheers Rocky, that came our really nice! looks verrry smooth
I didnt want to hang around with the 2k in the air last night after finishing the paint so i'll post some pics up in a little bit and there's is definitely a difference with the 2 techniques lol.
I saw you had some tan interior kick panels ready for paint in there, what did you paint them with? standard 2k or SEM / VHT plastic paint? how did they turn out? cheers!
p.s pics look good from here!

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").

And here is the final result:

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").

That looks rather nice

_________________
My '80 progress thread - hugger orange! Now with LQ9 power - forged pistons, LS2 rods, 236/242, .621/.612, flowed and milled 317 heads. MS3X

4L80e, 12 bolt, 4.11, Moroso brute strength posi, steel shafts.

Subframe connectors, g-braces, solid body bushes, carbon hood and front bumper, custom door cards, Autometer gauges.

Kick panels were brand new in black just used a wet on wet prime and shot the medium gold and matt clear.

_________________

Ah nice! 2k i take it? gonna have to borrow some of your matte clear, looks great! is this on a 1st gen? hows your 3rd gen coming along?
Cheers!

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").