The Camaro Club (UK)

Parked the car yesterday and pushed the sifter into park.
But the back wheels were on the edge of the floor tiling and the car moved forward just a little, and I thought blocked the
park pawl in the transmission.
Usually moving the car, taking pressure off will release the park pawl but I could´nt push back because of the tiles and not
forward because it was in park.
Car up in the air, tried to move the lever at the transmission, nothing, but when I disconnected the cable it moved freely.
Reconnected cable wheels on the ground.....nope.....still no shift at the shifter.

I ended up taking the shiftercable off the car and this is the problem......



Can´t grumble it´s been on the car since 1996 when I bought the B/M MegaShifter.

Yes that's a slight bit of wear.,

_________________
“You only live once, but if you do it right, once is enough.”

Apparently it could have shorted on the transmission, happens when there is´nt sufficient grounding of motor/transmission to chassis.
But saying that I do have double ground cables on the motor up front, there will be a third at the trans rear later....just to be sure.

I´ve got my new cable, heavy duty, here it is compared to the old one.