The Camaro Club (UK)

Online Community for all Camaro Owners and enthusiasts
It is currently Fri Nov 01, 2024 8:34 am

All times are UTC




Post new topic Reply to topic  [456 posts ]  Go to pagePrevious1394041424346Next
Author Message
 Post subject: Re: '79 project
PostPosted:Mon Aug 22, 2016 2:32 pm 
Offline
Big Block
User avatar

Joined:Tue Feb 23, 2010 12:40 pm
Posts:3245
Car Details:'79 Camaro, 350 V8
Location:South Bucks
The Trans Am is on the road... but has someone else's name on the V5 :oops: :(

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").


Top
   

Re: '79 project

Sponsor

Sponsor
 

 Post subject: Re: '79 project
PostPosted:Sun Aug 28, 2016 1:08 pm 
Offline
Big Block
User avatar

Joined:Tue Feb 23, 2010 12:40 pm
Posts:3245
Car Details:'79 Camaro, 350 V8
Location:South Bucks
Managed to get the paint runs sorted and finish the paint correction and waxing (the paint isn't without its faults :( ). Also sanded through to the primer on an edge :thumbdown:

Here's the sag and run on the quarter. Used a razor blade to flatten it, then 1500 to get rid of any marks, then farecla g3 advanced compound on a rotary buffer. Turned out pretty good (which is a very odd thing for me to say on this project). Onto the suspension today...

Image

Image

Image

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").


Top
   
 Post subject: Re: '79 project
PostPosted:Mon Aug 29, 2016 4:51 pm 
Offline
Big Block
User avatar

Joined:Tue Feb 23, 2010 12:40 pm
Posts:3245
Car Details:'79 Camaro, 350 V8
Location:South Bucks
How am i supposed to torque the upper control arm? I can't even get the socket on??

Image

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").


Top
   
 Post subject: Re: '79 project
PostPosted:Mon Aug 29, 2016 9:43 pm 
Offline
Big Block

Joined:Fri Feb 19, 2016 8:48 pm
Posts:83
Car Details:1999 Camaro Z28, Black.
Location:Birmingham, West Midlands
Quote:
How am i supposed to torque the upper control arm? I can't even get the socket on??
How's about something like https://www.amazon.co.uk/Neilsen-Torque ... B007JNGR6W


Top
   
 Post subject: Re: '79 project
PostPosted:Mon Aug 29, 2016 11:33 pm 
Offline
Big Block
User avatar

Joined:Fri Mar 19, 2010 1:35 am
Posts:2566
Car Details:79' camaro road & track day toy. 383 stroker, 5 speed TKO trans, lots of suspension stuff, 13" Vette brakes, 18" wheels.
Location:Luton
Guesstimated torque with ring spanners

_________________
“You only live once, but if you do it right, once is enough.”


Top
   
 Post subject: Re: '79 project
PostPosted:Tue Aug 30, 2016 8:55 pm 
Offline
Big Block
User avatar

Joined:Tue Feb 23, 2010 12:40 pm
Posts:3245
Car Details:'79 Camaro, 350 V8
Location:South Bucks
Quote:
That looks like a great bit of kit, thanks! Didn't have stock so no price listed either, will have to check some other places. It includes a 24mm which is what's needed for the upper nuts.
Quote:
Guesstimated torque with ring spanners
Ended up doing the same - didn't have a ring spanner above 22mm so used an adjustable wrench with a bar over it, so had about 18" of leverage and it's tight now, so i guess it will be ok. I guess if yours haven't come off yet it will be ok, as you use on track days and really put the parts to the test. Tried to remove the brake hose bracket but some genius put the the bolt hold in the middle of the bracket, which is where the 2 pipes sit ontop of, so you can only remove it with a spanner, which you don't have swing room on, so you'd need to take off the inner wheel arch to access it. Or, they could have just offset the bolt hole in the bracket . Ah well, it's tighter now.

Went to torque the rear but oddly, couldn't find a spanner or wrench that fits it. 22mm was too loose and slipped. 20mm was too small, so wouldn't go on. Looks like i will need a 21mm spanner and socket. But what confuses me is... i tightened it already... but how the hell did i manage that? I went through all the sockets and spanners and none fit. Quite confused and would like to time travel to see what i did :think:

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").


Top
   
 Post subject: Re: '79 project
PostPosted:Fri Sep 02, 2016 6:22 pm 
Offline
Big Block

Joined:Fri Feb 19, 2016 8:48 pm
Posts:83
Car Details:1999 Camaro Z28, Black.
Location:Birmingham, West Midlands
Quote:
Quote:
That looks like a great bit of kit, thanks! Didn't have stock so no price listed either, will have to check some other places. It includes a 24mm which is what's needed for the upper nuts.
Found these, but only 5 sets left https://www.amazon.co.uk/Interchangeabl ... RYA22TY42F


Top
   
 Post subject: Re: '79 project
PostPosted:Mon Sep 05, 2016 5:20 pm 
Offline
Big Block
User avatar

Joined:Fri Mar 19, 2010 1:35 am
Posts:2566
Car Details:79' camaro road & track day toy. 383 stroker, 5 speed TKO trans, lots of suspension stuff, 13" Vette brakes, 18" wheels.
Location:Luton
Any progress over the weekend matey ???

_________________
“You only live once, but if you do it right, once is enough.”


Top
   
 Post subject: Re: '79 project
PostPosted:Mon Sep 05, 2016 5:43 pm 
Offline
Big Block
User avatar

Joined:Tue Feb 23, 2010 12:40 pm
Posts:3245
Car Details:'79 Camaro, 350 V8
Location:South Bucks
No progress this weekend, it was my friends wedding which was a whole weekend ordeal. I've got this week off, which will be spent cleaning the garage (parts will be coming up for sale shortly) and repainting it and finishing the last couple of bits. Very stumped about the rear suspension torque as i know i had been able to tighten it, seems some spanners and sockets have gone for a walk is my only conclusion. I think i will have to just keep an eye on the threads. I'm pretty sure i did torque them, i just want to be double sure is all. Straightened the steering wheel out earlier in the week, so that was another thing ticked off. I believe it is MOT ready as everything else now is just small interior bits. Just need to get the guts to drive it now, i'm a bit scared :oops:

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").


Top
   
 Post subject: Re: '79 project
PostPosted:Mon Sep 05, 2016 9:51 pm 
Offline
Big Block
User avatar

Joined:Fri Mar 19, 2010 1:35 am
Posts:2566
Car Details:79' camaro road & track day toy. 383 stroker, 5 speed TKO trans, lots of suspension stuff, 13" Vette brakes, 18" wheels.
Location:Luton
Quote:
... Just need to get the guts to drive it now, i'm a bit scared :oops:
I'll come and supervise...

_________________
“You only live once, but if you do it right, once is enough.”


Top
   
Display posts from previous: Sort by 
Post new topic Reply to topic  [456 posts ]  Go to pagePrevious1394041424346Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 19 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited