The Camaro Club (UK)

After some aftermarket/decent exhaust manifolds/ headers for a 305/350 5 Speed manual 1990 Camaro.

_________________
http://www.cubicinches.co.uk - for all displacement petrol heads in the UK!

The first headers I bought were Edelbrock, with the air tube fittings, they just were´nt a decent gauge and got holes in them.

Now I have Hedman headers and Y pipe, not too expensive either.

http://www.summitracing.com/int/parts/h ... /overview/

http://www.summitracing.com/int/parts/h ... /overview/

I've got those in now and there terrible, good to start with but the way-pipe is terrible fitment and there already rotting through.

_________________
http://www.cubicinches.co.uk - for all displacement petrol heads in the UK!

You have to admit the Y pipe is in a nasty place, gets all the stones off the front wheel.

I´m more than content with mine, they do need painting again but there are no signs of rust.

Is your Y pipe rusting from the inside out, maybe it´s condensation from the motor ?

Possible header choices.
http://www.summitracing.com/int/search/ ... cation=int

I think most of these will require you to fabricate a means to connect to your existing exhaust.

Outside in, I'm a fan of stainless steel. Had it on my Capri and supra and never had a problem. Car has no exhaust as it has to have a custom made one due to the lpg tank fitted. So don't care for a y pipe as such.

Will have a proper look through it tonight, Cheers. If anyone in the uk has some decent ones let me know folks!

_________________
http://www.cubicinches.co.uk - for all displacement petrol heads in the UK!

I´d like stainless or ceramic coated but that is all quite expensive.

Maybe you should ask over at....http://www.rodsnsods.co.uk/forum/

Just asked a couple of companies in the UK and will keep looking. Cheers 3rdgenmalc

_________________
http://www.cubicinches.co.uk - for all displacement petrol heads in the UK!