The Camaro Club (UK)

I think that's for the ejector seat actuation relay... GM fired these to certain models in the 70's to counteract communism. So if a goddam hippy commie happen to not see your confederate flag in the rear window whilst hitch hiking through Alabama, you can offer him a ride and eject him through the T tops into the local creek... Definitely connect it back up.

_________________
“You only live once, but if you do it right, once is enough.”

Nailed it Stu. Installed it now:

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").

Well, interestingly enough that brown wire was actually an output not an input. The whole time i was testing, i had turned the key clockwise. Now, the ignition barrel doesn't click when you move from ACC to RUN, and i didn't want to turn it too much and start the car, so i think i may have been in ACC position. According to the diagram, that circuit is only active when in RUN or ACC 2 (which is when you put the key in an turn it anticlockwise). So i unplugged the brown wire, turned the key anticlockwise and the wipers worked. I will need to try them with the car running, just to be sure. Washer motor still doesn't work, even with the wipers wiping, so i'm going to get a unit as Flakmonkey suggested. I will eventually fix / replace the washer to have it work as it's supposed to, but for now, this will be a good backup solution.

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").

Ray, one of those will work just fine. Use the original 2 connections to the washer pump and extend them.

_________________
My '80 progress thread - hugger orange! Now with LQ9 power - forged pistons, LS2 rods, 236/242, .621/.612, flowed and milled 317 heads. MS3X

4L80e, 12 bolt, 4.11, Moroso brute strength posi, steel shafts.

Subframe connectors, g-braces, solid body bushes, carbon hood and front bumper, custom door cards, Autometer gauges.

That's great, thank you! I was thinking over the weekend how great it is when people here help out. Sometimes you dig yourself into a ditch and there doesn't seem to be a solution, and if there is, it's expensive and takes a long time. Then someone comes along with an idea and suddenly it lifts the burden off and you realise there are really simple and effective solutions out there. Makes a huge difference to a project along with the motivation for it. This is just one example (of many!) where this has happened, so wanted to mention how helpful everyone really is. It's often not just the problem it solves, but changes your outlook on a project and lifts your mood!

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").

Installed and tested, works great! Pretty powerful little motor for £5. Shoots washer fluid past the back of the car. Had to prime the line as at first it wasn't picking up any fluid from the bottle, partly not helped by the filter being a bit clogged. Used a squirty bottle to get fluid into the intake line and then it worked. I got a 3way t with a non return valve but it seems to be faulty. No fluid would come out and the motor would start to strain. I took it off and tried blowing air through the centre piece and it would just build up pressure and close itself. Which is kind of the opposite of what it should do (no pressure = closed, pressure = open). Tried using different points of the t as input / output but at best it would only output through 1 point, so a bit pointless. Not sure what's going on with that. So sorted, but not quite.

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").