The Camaro Club (UK)

Online Community for all Camaro Owners and enthusiasts
It is currently Fri Nov 22, 2024 4:08 pm

All times are UTC




Post new topic Reply to topic  [6 posts ] 
Author Message
PostPosted:Sat Jan 24, 2015 10:12 pm 
Offline
Small Block

Joined:Sat Jan 24, 2015 9:24 pm
Posts:32
Hello everyone, :wave:

Following my (short) life long obsession with the 3rd gen Camaro (now 28!) I went to look at my first 3rd gen today, 86' sports coupe, unfortunately it needed a 'bit' of TLC... rust around the outer parts of both rear wheel arches and door panels which would of required some welding, needed new outer T top seals/door seals, work to interior, new discs and a few other bits, also the clutch was really light, as in foot to the floor light?? i understand these are hydrullic clutches so had a feeling they may of been something up with it? (could be wrong)
Asking price was over £1500 with over 100k on the clock, seller would'nt go any lower so I decided to walk away... maybe Someone could let me know if the asking price was correct for the condition of the car? I certainly appreciate these are old cars and will need some maintaining and possible work but I just wasn't sure on this one..

I have to say the seller was a nice guy and spoke for ages about the car and let me have a drive which really did cement my need for one! I really am looking for a V6 rather than a V8 as for insurance reasons and running costs, if anyone out there knows of one available or ever thinks of selling theirs then please let me know!

In the mean time I will keep searching!

Thanks!


Top
   

New Member, Looking for 3rd gen camaro V6 Manual!

Sponsor

Sponsor
 

PostPosted:Sun Jan 25, 2015 1:30 pm 
Offline
Big Block
User avatar

Joined:Fri Mar 19, 2010 1:35 am
Posts:2566
Car Details:79' camaro road & track day toy. 383 stroker, 5 speed TKO trans, lots of suspension stuff, 13" Vette brakes, 18" wheels.
Location:Luton
Hello and welcome :wave:

Good job on wanting to bless yourself with one of the finest looking and sexiest cars ever made... :mrgreen:

The difference in running costs between V6 and V8 cars is very little, and I'm suprised insurance is too, but I'm assuming you've had some comparison quotes rom specialist insurers.
Guessing you're scouring the usual ads on Ebay and similar, as that's where most seem to crop up. Rocky is our resident 3rd gen parts specialist but I think he gets the occasional car for sale too, might be worth asking around at local yank car garages if they know any of their customers cars for sale.
These cars often will have rust, as the newest will be 23 years old now, so you're buying on condition rather than mileage.

_________________
“You only live once, but if you do it right, once is enough.”


Top
   
PostPosted:Sun Jan 25, 2015 10:28 pm 
Offline
Small Block

Joined:Sat Jan 24, 2015 9:24 pm
Posts:32
Hello, thanks for your reply,

Posted this in the 3rd page now and seems to be the consensus there to also look into V8s! i will continue to keep an eye out.

Thanks again.


Top
   
PostPosted:Mon Jan 26, 2015 10:06 am 
Offline
Big Block
User avatar

Joined:Sun Jan 13, 2013 7:00 am
Posts:1158
Car Details:1986 Camaro, bought into Spain by me in 1993.
305 replaced by a 355, 750 Demon carb, RPM AirGap intake, Brodix heads, Hedman Hedders, 3" Flowmaster exhaust.
Wheels are Summit aluminium 5 spokes, tyres are 245 rear 225 front BF Goodrich.
B/M transmission, battery relocated to the rear, GoodMark 4" cowl steel hood.
Location:Spain East Coast
Why are there two threads on this same subject ?


Top
   
PostPosted:Mon Jan 26, 2015 10:55 am 
Offline
Small Block

Joined:Sat Jan 24, 2015 9:24 pm
Posts:32
Quote:
Why are there two threads on this same subject ?
Because when i joined i had to post here first to then be able to post in the 3rd gen forum and wasnt really thinking at the time! im happy for this thread to be deleted and keep it to the 3rd gen forum only.

Thanks for your replies in the 3rd gen post btw!


Top
   
PostPosted:Mon Jan 26, 2015 6:09 pm 
Offline
Big Block
User avatar

Joined:Sun Jan 13, 2013 7:00 am
Posts:1158
Car Details:1986 Camaro, bought into Spain by me in 1993.
305 replaced by a 355, 750 Demon carb, RPM AirGap intake, Brodix heads, Hedman Hedders, 3" Flowmaster exhaust.
Wheels are Summit aluminium 5 spokes, tyres are 245 rear 225 front BF Goodrich.
B/M transmission, battery relocated to the rear, GoodMark 4" cowl steel hood.
Location:Spain East Coast
I love my B/M 700R4 automatic, I´d choose one over manual any day.
It has a cooler and cannister filter on it, really pampered.


Top
   
Display posts from previous: Sort by 
Post new topic Reply to topic  [6 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 20 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited