The Camaro Club (UK)

All bits came from my 2nd gen, can take to essex swap meet or can post smaller items

Gauges and pcb from U41 gauges £30 lot





Pair front spindles with good discs, new bearings and seals. Missing one dust cap. £50



Fram TH350 oil pan gasket £5


Standard SBC push rods, stock length brand new £10


One piece rear main flex plate £5


SBC rocker cover hold down plates - new in pack £5


Upper door trims - got some overspray but will polish up nicely £20

_________________
My '80 progress thread - hugger orange! Now with LQ9 power - forged pistons, LS2 rods, 236/242, .621/.612, flowed and milled 317 heads. MS3X

4L80e, 12 bolt, 4.11, Moroso brute strength posi, steel shafts.

Subframe connectors, g-braces, solid body bushes, carbon hood and front bumper, custom door cards, Autometer gauges.

Spindles would be a good buy for anyone looking to do a big brake conversion upgrade in the future.... Saves loads of time and hassle rather than using the ones on the car.

_________________
“You only live once, but if you do it right, once is enough.”

Pushrods and flex plate spoken for.

Also have a stock, booster/servo for 2nd gen. Reconditioned and painted black. Fitted for 200 miles. £40

_________________
My '80 progress thread - hugger orange! Now with LQ9 power - forged pistons, LS2 rods, 236/242, .621/.612, flowed and milled 317 heads. MS3X

4L80e, 12 bolt, 4.11, Moroso brute strength posi, steel shafts.

Subframe connectors, g-braces, solid body bushes, carbon hood and front bumper, custom door cards, Autometer gauges.