The Camaro Club (UK)

I am upgrading to 4bbl carb n manifold to replace old 2bbl carb etc.
Question is can and how do I remove all emission and egr bits.
What do I plug etc. Rocker cover vents too?

Not sure what set up you've got but you can take most of it away, but I would not remove the PCV valve from the rocker covers or you may find that your rear oil seal will leak a little oil.

Just put a breather on on rocker cover, and a PCV to the carb on the other. I'm guessing everything else can just be removed and plugged if you're going aftermarket 4 barrel.

_________________
“You only live once, but if you do it right, once is enough.”