The Camaro Club (UK)

Online Community for all Camaro Owners and enthusiasts
It is currently Fri Nov 01, 2024 12:35 pm

All times are UTC




Post new topic Reply to topic  [105 posts ]  Go to pagePrevious1234511Next
Author Message
PostPosted:Fri Sep 09, 2011 9:45 pm 
Offline
Big Block

Joined:Wed Jul 15, 2009 6:48 pm
Posts:493
Car Details:68 pontiac firebird coupe project car,my aim is a street friendly,lightly modified pro.touring style.
Lowered ,mild body mods,400 cu in SBC engine, Muncie 4speed, 10 bolt posi axle,disc front drum rear.
68 firebird convertible ( long term project) Stock resto/mod style ,400 pontiac th350
Nice work so far ,frightening to see how far rust spreads if left untreated or even worse hidden under poor repairs. When I bought my '73 the rot was painfully obvious [ hardly any trunk floor and rust on the rear fenders that extended almost up to the rear window!]
I kept mine as a running restoration but don't think the MOT testers would let me get away with it now. :lol:
Looking forward to your next installment .


Top
   

Re: 1970 Camaro RS - Project

Sponsor

Sponsor
 

PostPosted:Thu Sep 15, 2011 6:11 pm 
Offline
Big Block
User avatar

Joined:Mon Jun 20, 2011 8:15 pm
Posts:120
Car Details:1970 Camaro RS 350/350
Location:Thatcham - Berkshire
Thanks Firebird68, there were plenty of times I thought about throwing in the towel, everyone who saw it thought I was crazy! There's no-way anyone would have given this an MOT!

The work on the wheel arches was progress but I needed to tackle the frame rails, they were beyond repair and like tissue paper, when you pinched them the whole rail squashed and flexed...

Image

Out with the plasma cutter again, didn't take too long to cut out!

Image

The rails actually locate fairly easily, there are the 3 bolts in the shock-well and the locators on the front, all you need do is push it hard up...

Image

Passenger side was much worse..

Image

I got the arches welded up before I finished up the rails, not sure why, think I just needed to get some new metal on!

Image

Image

Image

Even managed to get some of the parts shotblasted and primed up...

Image

New metal and primer always makes you feel better!


Top
   
PostPosted:Sat Sep 17, 2011 8:29 am 
Offline
Big Block

Joined:Thu Jul 21, 2011 2:16 pm
Posts:815
Car Details:1980 2nd Gen, 6.0 iron block LS, 4.11 12 bolt axle, Brute Strength Posi, Lowered 2", sub frame connectors, G-braces, Carbon hood and front bumper cover
Location:Norfolk
Coming on really nicely 8-)

Keep up the good work :thumbup:

Seems like there are a lot more parts available for the 70-73 cars than the 74-81, like full frame rails which must be a bit of a bonus. Nothing better than fixing stuff properly by putting new metal in there. :D

_________________
My '80 progress thread - hugger orange! Now with LQ9 power - forged pistons, LS2 rods, 236/242, .621/.612, flowed and milled 317 heads. MS3X

4L80e, 12 bolt, 4.11, Moroso brute strength posi, steel shafts.

Subframe connectors, g-braces, solid body bushes, carbon hood and front bumper, custom door cards, Autometer gauges.


Top
   
PostPosted:Sun Mar 17, 2013 1:13 pm 
Offline
Big Block
User avatar

Joined:Mon Jun 20, 2011 8:15 pm
Posts:120
Car Details:1970 Camaro RS 350/350
Location:Thatcham - Berkshire
Hi Everyone, promised I'd keep this up to date and have so far been pretty rubbish, FlakMonkey gave me a nudge about the NSRA swap meet the other day and even that was only a flying visit so I missed everyone there. So I thought I'd try and get this a little more up to date, only about 2 years worth of pictures to update you guys on!

So where I left off was when I was working on the back end of the car when the car was still in Kent, this was the garage I was working in...

Image

With the frame rails I bolted them in place first and checked the alignment. After lots of measuring, tweaking and checking I took the plunge and welded them up.

Image

Again I ground flat the welds and slapped on some primer to protect the steel as a temporary measure.

Image

The fit of the Goodmark rails was near as dammit perfect. One was slightly worse than the other and needed a little more persuasion, however the end product was great. I was surprised how few and far between the original factory welds were, the new rails are more secure than the old ones!

Once the frame rails were on next on the job list was the suspension. In the end I went with Hotchkis sport leafs on the rear with HPS1000 shocks. I was concious that I wanted to drop the rear end a touch and stiffen it up and these seemed to fit the bill. Regardless it should be a significant improvement over the previous owners 'non matching' original ones, which are now on the scrap pile!

These are the shocks I put on...

Image

I wasn't very happy with the factory finish (plus there was some shipping damage) so I rubbed the leafs down and gave them a coat of KBS Blacktop, this way they have a decent weatherproof finish and match the axle.

Image

I assembled the parts and then fitted the wheels to help install the assembly, it was certainly easier to wheel the assembly under than try and jack/lift it in place.

Image

I got the front buckets bolted up and then lifted the axle up with a jack to meet the rear shackles.

Image

Image

Once this was all installed I lowered the body back down onto pallets and blocked the rear wheels up. This way the whole car and rear end was supported to keep the weight of the axle and suspension off the frame rails until I'd stiffened it up with the new trunk floor.

I'll give you guys chance to digest these and I'll post more up over the next few weeks!


Top
   
PostPosted:Sun Mar 17, 2013 1:59 pm 
Offline
Big Block
User avatar

Joined:Tue Feb 23, 2010 12:40 pm
Posts:3245
Car Details:'79 Camaro, 350 V8
Location:South Bucks
Very great progress :thumbup: You sure are getting stuck in there, good to see such level of involvement and detail :)

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").


Top
   
PostPosted:Sun Mar 17, 2013 2:38 pm 
Offline
Big Block

Joined:Sat Oct 30, 2010 9:56 pm
Posts:268
Car Details:hi i have had my 70 z28 for bowt 5years now when i got it it needed a full resto an now am finaly geting to the end just have a few more bits to find and i cant wait till shes dne.
Location:north east
looking good mate are they goodmark panels your useing?


Top
   
PostPosted:Sun Mar 17, 2013 6:02 pm 
Offline
Big Block
User avatar

Joined:Mon Jun 20, 2011 8:15 pm
Posts:120
Car Details:1970 Camaro RS 350/350
Location:Thatcham - Berkshire
Thanks guys, plenty of photos yet to come, hopefully the photos will help others with their projects.

All the sheetmetal that has gone on the car was from Goodmark, nothing more than the usual few tweeks to get things spot on, very pleased with their panels.


Top
   
PostPosted:Thu Mar 21, 2013 12:34 pm 
Offline
Big Block
User avatar

Joined:Mon Jun 20, 2011 8:15 pm
Posts:120
Car Details:1970 Camaro RS 350/350
Location:Thatcham - Berkshire
Next on the agenda was the trunk floor, I was originally going to repair using a patch panel but things snowballed as they do and I ended up using an assembly. Unfortunately the reproduction trunk pans have a buldge in them behind the rear seat which was not present on the 1970 models.

I cut out all the rotten metal from the trunk floor but had sufficient left to graft the new floor in. I was able to keep the spare tire hold down bracket...

Image

I took some rough cuts of the trunk and started cutting and shaping the bulge to match the exisiting metal.

Image

I had to weld in some pieces at the far end but it took shape quite nicely.

Image

Before I tacked the floor in place I had to convince myself that the fit and alignment was ok. I mocked up the rear end and clamped it in place to check fitments. All was ok - Phew, measure twice cut and weld once right?!

Image

The final fit with all the folds welded up.

Image

Ready to weld...

Image

Welded...

Image

Close up showing the blend.

Image

Ground flat the welds to smooth everything out.

Image

The finished product, more primer!

Image

This was a massive hurdle in the project, at this point it felt like I'd got some of the hardest fabrication out the way, little did I know!


Top
   
PostPosted:Sun Mar 24, 2013 12:56 pm 
Offline
Big Block
User avatar

Joined:Mon Jun 20, 2011 8:15 pm
Posts:120
Car Details:1970 Camaro RS 350/350
Location:Thatcham - Berkshire
Next installment...

After the trunk I got the drop offs installed, a fairly easy job in comparisson, until I came to weld them!

Image

Image

And more primer...

Image

A shot of the underneath...

Image

At this point in the build there wasn't much more I could do on the rear end so I made a small start on the front in preparation to repair the roof issues.

Image

Got the cowl panel cut out and was relieved to find the metalwork underneath to be solid. The worst part was the roof pillar bases which I knew about anyway.

I'll post photos of the roof change later!


Top
   
PostPosted:Sun Mar 24, 2013 8:28 pm 
Offline
Big Block

Joined:Thu Jul 21, 2011 2:16 pm
Posts:815
Car Details:1980 2nd Gen, 6.0 iron block LS, 4.11 12 bolt axle, Brute Strength Posi, Lowered 2", sub frame connectors, G-braces, Carbon hood and front bumper cover
Location:Norfolk
Thanks for updating here too :) good to revist all this stuff. I'd partially forgotten that you more or less replaced every bit of sheet metal on this!

_________________
My '80 progress thread - hugger orange! Now with LQ9 power - forged pistons, LS2 rods, 236/242, .621/.612, flowed and milled 317 heads. MS3X

4L80e, 12 bolt, 4.11, Moroso brute strength posi, steel shafts.

Subframe connectors, g-braces, solid body bushes, carbon hood and front bumper, custom door cards, Autometer gauges.


Top
   
Display posts from previous: Sort by 
Post new topic Reply to topic  [105 posts ]  Go to pagePrevious1234511Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 38 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited