The Camaro Club (UK)

Online Community for all Camaro Owners and enthusiasts
It is currently Thu Nov 14, 2024 5:26 pm

All times are UTC




Post new topic Reply to topic  [3 posts ] 
Author Message
 Post subject: making a fuel line
PostPosted:Sun Sep 02, 2012 3:17 pm 
Offline
Big Block
User avatar

Joined:Tue Feb 23, 2010 12:40 pm
Posts:3245
Car Details:'79 Camaro, 350 V8
Location:South Bucks
My fuel line, that runs between tank and carb, 1 single line, has maybe a year left before it starts leaking from the corrosion, so as it's out now i would like to replace it with stainless line. The current line is 8mm / 5/16th inner diameter so i plan to do a like for like. What i'm struggling with is understanding how to bend the pipe. Pipe benders i'm finding in most places do 6/ 8/ 10 mm but they all list as "for copper". Will these work for stainless pipe / tubing? Or would the tool give up? I cannot for the life of me find anything that will bend stainless line but i know a lot of custom cars have stainless lines. Does anyone have any thoughts / insights on how i can copy my current line into stainless?

Cheers!!

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").


Top
   

making a fuel line

Sponsor

Sponsor
 

 Post subject: Re: making a fuel line
PostPosted:Sun Sep 02, 2012 8:31 pm 
Offline
Big Block

Joined:Thu Jul 21, 2011 2:16 pm
Posts:815
Car Details:1980 2nd Gen, 6.0 iron block LS, 4.11 12 bolt axle, Brute Strength Posi, Lowered 2", sub frame connectors, G-braces, Carbon hood and front bumper cover
Location:Norfolk
They will bend it, but its tough stuff. Really tricky to flare as well without an expensive tool. Make sure you get annealed tube if you do get it.

_________________
My '80 progress thread - hugger orange! Now with LQ9 power - forged pistons, LS2 rods, 236/242, .621/.612, flowed and milled 317 heads. MS3X

4L80e, 12 bolt, 4.11, Moroso brute strength posi, steel shafts.

Subframe connectors, g-braces, solid body bushes, carbon hood and front bumper, custom door cards, Autometer gauges.


Top
   
 Post subject: Re: making a fuel line
PostPosted:Mon Sep 03, 2012 12:00 pm 
Offline
Big Block
User avatar

Joined:Tue Feb 23, 2010 12:40 pm
Posts:3245
Car Details:'79 Camaro, 350 V8
Location:South Bucks
Thanks, that sounds good - i've seen one that says copper and steel, so that will probably be ok with stainless, i'm trying to find somewhere that will stock the tube now. Have emailed a couple of places and asked for annealed i they have it. I've seen a variety of flaring tools too, they dont give too much info of their construction so i'll keep digging to make sure i find a more solid built one. Will keep you updated!

Cheers,

Ray

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").


Top
   
Display posts from previous: Sort by 
Post new topic Reply to topic  [3 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 100 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited