The Camaro Club (UK)

Online Community for all Camaro Owners and enthusiasts
It is currently Fri Nov 01, 2024 2:41 pm

All times are UTC




Post new topic Reply to topic  [456 posts ]  Go to pagePrevious1789101146Next
Author Message
 Post subject: Re: '79 project
PostPosted:Fri Aug 31, 2012 10:40 pm 
Offline
Big Block
User avatar

Joined:Tue Feb 23, 2010 12:40 pm
Posts:3245
Car Details:'79 Camaro, 350 V8
Location:South Bucks
Why do i always say "oh it should only take a day" :roll:

So got the majority of the panel to under 1mm differences when running a massive rule against it. One patch left where it's 2mm low, so working that tomorrow.

Then i must re-align the door as the quarter to door body line was based on a body filler line, which once removed turned out that the door needs to be dropped 1.5mm. Explains the slightly off fit of the door to quarter before.

Then 2 patch panels to do.

Then the fender on the passenger side needs to be straightened out as that too got caught up in the fun time that the door had with another object.

Then, etch, sealer, skim of filler then sanding the rest of the car to 320, then primer. then paint. then fuel line. then exhaust. then someone come and finish the rest for me i'm tired thanks. :yawn:

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").


Top
   

Re: '79 project

Sponsor

Sponsor
 

 Post subject: Re: '79 project
PostPosted:Sat Sep 01, 2012 9:26 am 
Offline
Big Block
User avatar

Joined:Mon Feb 09, 2009 12:41 pm
Posts:2451
Quote:
Why do i always say "oh it should only take a day" :roll:


Then, etch, sealer, skim of filler then sanding the rest of the car to 320, then primer. then paint. then fuel line. then exhaust. then someone come and finish the rest for me i'm tired thanks. :yawn:
Ray, don't put filler over the etch/sealer, it should either be on the bare metal or over epoxy primer hth

cheers...Nige

_________________
Too much power...not enough hands!!


Top
   
 Post subject: Re: '79 project
PostPosted:Sun Sep 02, 2012 12:04 pm 
Offline
Big Block
User avatar

Joined:Tue Feb 23, 2010 12:40 pm
Posts:3245
Car Details:'79 Camaro, 350 V8
Location:South Bucks
Hey Nige,

Ye i saw in the TDS of the etch that is said to not put polyster material ontop of etch, so i thought that using a primer sealer ontop of etch would create a barrier to the etch? Or would it need to be epoxy only?

I really want to avoid putting filler directly onto metal to avoid any areas of rust breaking through.

Cheers!

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").


Top
   
 Post subject: Re: '79 project
PostPosted:Tue Sep 04, 2012 7:46 am 
Offline
Big Block

Joined:Thu Jul 21, 2011 2:16 pm
Posts:815
Car Details:1980 2nd Gen, 6.0 iron block LS, 4.11 12 bolt axle, Brute Strength Posi, Lowered 2", sub frame connectors, G-braces, Carbon hood and front bumper cover
Location:Norfolk
Epoxy primer first, the filler, then epoxy. You don't need to use any etch primer with epoxy.

Anyway, great work so far, looking good! Panel work is always time consuming. Rather rewarding though.

_________________
My '80 progress thread - hugger orange! Now with LQ9 power - forged pistons, LS2 rods, 236/242, .621/.612, flowed and milled 317 heads. MS3X

4L80e, 12 bolt, 4.11, Moroso brute strength posi, steel shafts.

Subframe connectors, g-braces, solid body bushes, carbon hood and front bumper, custom door cards, Autometer gauges.


Top
   
 Post subject: Re: '79 project
PostPosted:Tue Sep 04, 2012 10:30 am 
Offline
Big Block
User avatar

Joined:Mon Feb 09, 2009 12:41 pm
Posts:2451
Quote:
Hey Nige,

Ye i saw in the TDS of the etch that is said to not put polyster material ontop of etch, so i thought that using a primer sealer ontop of etch would create a barrier to the etch? Or would it need to be epoxy only?

I really want to avoid putting filler directly onto metal to avoid any areas of rust breaking through.

Cheers!
As Flak monkey says, epoxy & then filler followed by epoxy, then primer filler, followed by topcoat.

sent you an email on this, hope it helps

cheers...nige

_________________
Too much power...not enough hands!!


Top
   
 Post subject: Re: '79 project
PostPosted:Sun Nov 11, 2012 10:23 pm 
Offline
Big Block
User avatar

Joined:Tue Feb 23, 2010 12:40 pm
Posts:3245
Car Details:'79 Camaro, 350 V8
Location:South Bucks
Surely the car should be closer to being done? May have to name this thread '79 unprogress. Or alternatively, view this thread backwards.

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").


Top
   
 Post subject: Re: '79 project
PostPosted:Sun Nov 11, 2012 10:29 pm 
Offline
Big Block
User avatar

Joined:Tue Feb 23, 2010 12:40 pm
Posts:3245
Car Details:'79 Camaro, 350 V8
Location:South Bucks
Right, well the site isn't allowing me to upload pics :roll: so, imagine a good looking camaro gone bad and that's what you would be seeing here

And the site won't let me edit my post, so the above belongs in the above

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").


Top
   
 Post subject: Re: '79 project
PostPosted:Mon Nov 12, 2012 9:35 am 
Offline
Big Block

Joined:Thu Jul 21, 2011 2:16 pm
Posts:815
Car Details:1980 2nd Gen, 6.0 iron block LS, 4.11 12 bolt axle, Brute Strength Posi, Lowered 2", sub frame connectors, G-braces, Carbon hood and front bumper cover
Location:Norfolk
Whats happened?

_________________
My '80 progress thread - hugger orange! Now with LQ9 power - forged pistons, LS2 rods, 236/242, .621/.612, flowed and milled 317 heads. MS3X

4L80e, 12 bolt, 4.11, Moroso brute strength posi, steel shafts.

Subframe connectors, g-braces, solid body bushes, carbon hood and front bumper, custom door cards, Autometer gauges.


Top
   
 Post subject: Re: '79 project
PostPosted:Mon Nov 12, 2012 1:11 pm 
Offline
Big Block
User avatar

Joined:Tue Feb 23, 2010 12:40 pm
Posts:3245
Car Details:'79 Camaro, 350 V8
Location:South Bucks
There was a nasty crease along the bottom of the fender, managed to hammer and dolly it out. But there was another dent on the top of the arch, including the arch lip, making it tough to work on. Have been trying to work it for 2 weekends now :(

Image

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").


Top
   
 Post subject: Re: '79 project
PostPosted:Tue Nov 13, 2012 6:12 pm 
Offline
Big Block
User avatar

Joined:Fri Mar 19, 2010 1:35 am
Posts:2566
Car Details:79' camaro road & track day toy. 383 stroker, 5 speed TKO trans, lots of suspension stuff, 13" Vette brakes, 18" wheels.
Location:Luton
Looking.... errrr .... in pieces... ;)

_________________
“You only live once, but if you do it right, once is enough.”


Top
   
Display posts from previous: Sort by 
Post new topic Reply to topic  [456 posts ]  Go to pagePrevious1789101146Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 24 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited