The Camaro Club (UK)

Brand new Howard Camshaft purchased in Error from Summit Racing There price is $259.95 Plus the freight and Vat.

NOW AT GIVE AWAY PRICE DONT MISS IT
My price below:

Warning
This will not fit a TPI engine
Details below or just look it up on Summit website

Brand Howards Cams

Manufacturer's Part Number 180245-10
Part Type Camshafts

Product Line Howards Cams Hydraulic Roller Camshafts

Summit Racing Part Number HRS-180245-10

Cam Style Hydraulic roller tappet
Basic Operating RPM Range 1,600-5,400
Intake Duration at 050 inch Lift 225
Exhaust Duration at 050 inch Lift 231
Duration at 050 inch Lift 225 int./231 exh.
Advertised Intake Duration 278
Advertised Exhaust Duration 284
Advertised Duration 278 int./284 exh.
Intake Valve Lift with Factory Rocker Arm Ratio 0.500 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio 0.510 in.
Valve Lift with Factory Rocker Arm Ratio 0.500 int./0.510 exh.
Lobe Separation (degrees) 110
Camshaft Gear Attachment 3-bolt
Computer-Controlled Compatible No
Valve Springs Required Yes
Camshaft Manufacturers Description Fair idle, street/strip, auto OK with 2,500+ stall.

_________________

Do you know if this would fit the TBI engine?
thanks

I had a friend that put this in my 86 TPI engine but after i had problems with it running I checked the spec and it says clearly not for computer controlled cars so i had to take it out.
The car never ran with this cam so it is as new.

I was not happy!! and needless to say my mate and me are not speaking if yours is not computer controlled it should work fine but please check out some forums first as i can not be sure Summit web site also gives you all the details.
I'm sure if you email Summit and ask them if this cam will be ok in your car they will tell you as they will think your going to buy it from them.

I have now fitted the correct Cam in my 86 TPI

Hope this helps
Cheers

_________________

BARGIN OF THE YEAR PRICE DROPPED NOW TO WAIT FOR IT £45 GOTTA GO

I will not advertise again as Going in scrap skip otherwise

_________________

It will work in TPI you just need to recalibrate everything.
So unless you can do that then its not suitable.

Spec looks good though.

_________________
1999 Z28 Camaro TT, A4, Borla, BBK, LS6, Comp LSR, Efilive COS5 - 2007 VXR8 Darton, Comp, Callies, Diamond, DiFilippo