The Camaro Club (UK)

Online Community for all Camaro Owners and enthusiasts
It is currently Fri Nov 22, 2024 10:33 pm

All times are UTC




Post new topic Reply to topic  [18 posts ]  Go to page12Next
Author Message
PostPosted:Mon Jun 25, 2012 5:01 pm 
Offline
Small Block

Joined:Sat Jun 23, 2012 7:20 pm
Posts:29
Car Details:The worlds rustiest 67 Camaro.
Hello, I have just bought a really rusty early 67, V8, its a total restoration case and I am weighing up my options quite carefully right now.
I run a small transport and storage yard with a side line in restoring interesting things, cars, old signs, petrol pumps, vintage garage accessories so this Camaro is not really a problem, just time consuming.

I understand it came into the country in November last year from all the paperwork I have with it, I looked it over and almost walked when I saw the state of it but I decided a complete-ish rust bucket was better than no Camaro so bought it anyway.

The rear Shocks are both in front of the axle and the ViN tag is on the driver door shut, it has an LSD fitted and I believe it has Corvette wheels, either both or certainly the rears.

I am 38 years old this year and want to drive this on my 40th birthday in October 2014. we shall see !

Currently on my big thinking list is the pros and cons of a new body shell, very expensive but ought to save a lot of time, the other alternative is to buy almost all the panels and fix this existing shell, that would require both rear quarters, a trunk floor, a parcel shelf assembly, roof and inner drip rails and some floor pan repairs. Oh, and the upper front cowl is gone too....

I can do the job, its just wether I want to spend a year welding.

Image


Image


Top
   

New 1967 Camaro owner saying hi.

Sponsor

Sponsor
 

PostPosted:Mon Jun 25, 2012 5:26 pm 
Offline
Big Block
User avatar

Joined:Sat May 15, 2010 2:16 pm
Posts:264
Car Details:1999 (Registered as New 2001) Black 3.8 V6 Targa Top
Location:March, Cambridgeshire
Welcome to the forum, it's good to have another member and another 1st Gen being restored. Sounds like a big project but at least your giving yourself plenty of time, you might need it though :lol: . These things have a habit of taking longer than planned. Good luck with it all.

_________________
Cheers Gerry


Top
   
PostPosted:Mon Jun 25, 2012 6:06 pm 
Offline
Small Block

Joined:Sat Jun 23, 2012 7:20 pm
Posts:29
Car Details:The worlds rustiest 67 Camaro.
Thanks, I am going to court controversy a bit and tell you all now I am intending to build an SS clone, hideaway lamps, all the extra lower valance lamps and red deluxe interior.

Gloss black body, chrome trim around windows and rocker panels.

The car was originally gold and with a low spec interior, its been monkeyed about with long before it got here so I am not quite so afraid of buggering up originality.


Top
   
PostPosted:Mon Jun 25, 2012 6:16 pm 
Offline
Small Block
User avatar

Joined:Fri Jun 22, 2012 5:15 pm
Posts:18
Car Details:Black 1979 Z28
Hi there, one noobi to another, glad to say mine is good to go... but an ss clone sounds good.


Top
   
PostPosted:Tue Jun 26, 2012 1:40 pm 
Offline
Big Block
User avatar

Joined:Thu Jul 10, 2008 10:41 am
Posts:827
Car Details:1968 Camaro Racing Car "Butch"
1968 Camaro Convertible 327"Camilla"
1979 AMC CJ7 Jeep 360V8
1980 BMW E21 Alpina B6 2.8
1991 BMW E30 HartgeH26
1958 as yet unrevealed sportsracer with chevV8
Location:Isle of Man and Inverness
sounds like you are after building an RS clone

SS option gives you mechanical improvements the RS the hideaway headlamps etc

you can have an RS/SS

sounds like quite a project you have there!

keep us posted

_________________
Kind Regards
TopCat
Secretary
Classic Camaro Club
Member of The Association of American Car Clubs UK
Email :tboles@strathnoon.co.uk Websites: http://www.classiccamaroclubuk.com and:
http://www.youtube.com/watch?v=IdhLJtR_ZY4


Top
   
PostPosted:Tue Jun 26, 2012 6:30 pm 
Offline
Small Block

Joined:Sat Jun 23, 2012 7:20 pm
Posts:29
Car Details:The worlds rustiest 67 Camaro.
Hi,

In an effort to understand what I have here I have decoded the ViN and body ViN.

It seems the car was built in Los Angeles in the second week of January 1967, as a V8 coupe, it had a Gold Interior with non-headrest bucket seats, It had the option for tinted windows and deluxe seatbelts. Outside it was "double" Gold.

Engine wise it was fitted with a 327 and a two speed powerglide trans.

No Aircon.

The body ViN took some decoding because it was quite badly damaged, it has had a hard impact at some point so it is not readable from the front, we had to remove it and read it from the back in a mirror. I suspect the impact was from a transmission tailhousing judging by the size and shape of the impact.

The Engine is not original, nor is the trans, this backs up my body ViN damage theory. The motor is a 68 from an as yet unknown donor vehicle, I will be making efforts to ascertain what this was.

The Main ViN was in the door shut, and matches the hidden ViNs, (top of cowl and behind the heater box)

Today I removed the intake manifold and cleaned it up, its a nice Edelbrock item so will be going back on what ever motor I build for it, possibly even this one if it turns out to be do-able. I am picking a small job to do each day to get me started while i wait for panel prices to come in from the various people I emailed.

I am going with an RS/SS clone for sure, I like the look of the hidden lamps


Top
   
PostPosted:Tue Jun 26, 2012 9:02 pm 
Offline
Big Block

Joined:Wed Jul 15, 2009 6:48 pm
Posts:493
Car Details:68 pontiac firebird coupe project car,my aim is a street friendly,lightly modified pro.touring style.
Lowered ,mild body mods,400 cu in SBC engine, Muncie 4speed, 10 bolt posi axle,disc front drum rear.
68 firebird convertible ( long term project) Stock resto/mod style ,400 pontiac th350
Hi and welcome, nice to see a 1st gen project car .
Will be interesting to watch this one take shape ,I always liked the RS/SS combination of looks and performance .The good thing is that just about every panel and part are now available, so even cars that were once almost impossible to restore are now viable...good luck . :thumbup:


Top
   
PostPosted:Tue Jun 26, 2012 10:30 pm 
Offline
Small Block

Joined:Sat Jun 23, 2012 7:20 pm
Posts:29
Car Details:The worlds rustiest 67 Camaro.
Too right about the parts availability, I think it might be possible to build a complte car without actually having a car to start with.

Sort of a Kit car but cooler looking.

I have started collecting smaller parts and bits that I know I am going to have to recondition, the front seats are a long way off being sat in but If I can get a good pair of bases i can get the new foam and covers in for them later on and do them all at the same time when I do need them.

I am lucky in so far as I have loads of storage, I have a container yard as part of the haulage business and we have a good stock of empty containers ! they are a perfect instant garage or parts store.


Top
   
PostPosted:Wed Jun 27, 2012 10:22 am 
Offline
Big Block
User avatar

Joined:Mon Feb 09, 2009 12:41 pm
Posts:2451
Welcome to the forum, I'm looking forward to seeing this one come together, I just love the RS version of these cars

cheers...Nige

_________________
Too much power...not enough hands!!


Top
   
PostPosted:Wed Jun 27, 2012 4:04 pm 
Offline
Small Block

Joined:Sat Jun 23, 2012 7:20 pm
Posts:29
Car Details:The worlds rustiest 67 Camaro.
Once I start actually doing the project I will start a project thread.

for the moment I am piXXing about buying little bits and bobs to satisfy my impatience, once I get the big shhet metal parts delivery then the real work starts.


Top
   
Display posts from previous: Sort by 
Post new topic Reply to topic  [18 posts ]  Go to page12Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 43 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited