The Camaro Club (UK)

Online Community for all Camaro Owners and enthusiasts
It is currently Thu Nov 14, 2024 6:05 pm

All times are UTC




Post new topic Reply to topic  [7 posts ] 
Author Message
 Post subject: Holding up the rear
PostPosted:Thu May 24, 2012 3:21 pm 
Offline
Big Block
User avatar

Joined:Tue Feb 23, 2010 12:40 pm
Posts:3245
Car Details:'79 Camaro, 350 V8
Location:South Bucks
Odd question i know!

i'm after some advice on how to hold up the rear of the car based on:

Everything is removed - glass, fuel tank, suspension, axle etc, just the body, with doors and trunk lid.

What i need to acheive:

I've stripped the underneath to metal and repaired parts that need attention. need to paint, but currentyl axle stands are on the chasis rail. Trying to see where i can relocate jack stands to, so can paint in one, and keep the car in the air safely. I'll try add a pic to show what i'm doing. basically painting entire chasis rail and sheet metal around it. the rear seat drop outs are not being painted, wondered if i could put some longer blocks of wood along it to spread the load across the floor board and place a couple of jack there?

Hope that makes sense, any help help is much appreciated!

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").


Top
   

Holding up the rear

Sponsor

Sponsor
 

 Post subject: Re: Holding up the rear
PostPosted:Thu May 24, 2012 4:13 pm 
Offline
Big Block

Joined:Thu Jul 21, 2011 2:16 pm
Posts:815
Car Details:1980 2nd Gen, 6.0 iron block LS, 4.11 12 bolt axle, Brute Strength Posi, Lowered 2", sub frame connectors, G-braces, Carbon hood and front bumper cover
Location:Norfolk
Got an engine crane?

_________________
My '80 progress thread - hugger orange! Now with LQ9 power - forged pistons, LS2 rods, 236/242, .621/.612, flowed and milled 317 heads. MS3X

4L80e, 12 bolt, 4.11, Moroso brute strength posi, steel shafts.

Subframe connectors, g-braces, solid body bushes, carbon hood and front bumper, custom door cards, Autometer gauges.


Top
   
 Post subject: Re: Holding up the rear
PostPosted:Sat May 26, 2012 6:17 pm 
Offline
Big Block
User avatar

Joined:Tue Feb 23, 2010 12:40 pm
Posts:3245
Car Details:'79 Camaro, 350 V8
Location:South Bucks
no unfortunately not. Just 4 axles stands and 2 hydraulic trolley jacks. The front is sat on the wheels still, so really a case of trying to find the best way to hold up the rear to give enough access to get a spray gun in there to cover all the parts. Cheers!

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").


Top
   
 Post subject: Re: Holding up the rear
PostPosted:Sun May 27, 2012 5:42 pm 
Offline
Big Block
User avatar

Joined:Thu Apr 07, 2011 10:06 pm
Posts:295
Car Details:89 RS V6 Camaro Moggy Traveller with Fiat two litre twincam 35 Standard flying 12 To be Rodded ????
Location:middlesbrough North East
Hi Ray did you get any pics of the back of your car ? is your rear bumper still on ? do you have any where to tie your car up to, as if you hav,nt got rear bumper on you could always tie it up to a beam or wire it up ? through the bumper holes ,if not paint it then moove your axel stands and paint any bits missed Cheers Neil :thumbup:


Top
   
 Post subject: Re: Holding up the rear
PostPosted:Mon May 28, 2012 11:15 am 
Offline
Big Block
User avatar

Joined:Tue Feb 23, 2010 12:40 pm
Posts:3245
Car Details:'79 Camaro, 350 V8
Location:South Bucks
Hey Neil,

Sorry wasn't in the garage much this weekend. Should be able to get a pic tonight though. Have replaced the rear with fibreglass bumper but i do like the idea of putting on the steel anchor bumper and propping up with axle stands.

Other than that, i'll add a pic tonight of my only other idea, which is to put some 2x4 strips of wood under the floor panel where the back seats go and hold up with axle stands. thinking that if i can spread the weight enough it might be ok?

Cheers!

Ray

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").


Top
   
 Post subject: Re: Holding up the rear
PostPosted:Mon May 28, 2012 12:36 pm 
Offline
Big Block

Joined:Thu Jul 21, 2011 2:16 pm
Posts:815
Car Details:1980 2nd Gen, 6.0 iron block LS, 4.11 12 bolt axle, Brute Strength Posi, Lowered 2", sub frame connectors, G-braces, Carbon hood and front bumper cover
Location:Norfolk
I tried jacking my empty shell on the rear seat area and it wasn't having it, even with a bit of 6x3 under there, so gave up and jacked it on the frame rails as normal.

My suggestion for the engine crane was to just lift it using the rear bumper, assuming your frame rails are solid enough! But you could just use a large jack and axle stands instead.

_________________
My '80 progress thread - hugger orange! Now with LQ9 power - forged pistons, LS2 rods, 236/242, .621/.612, flowed and milled 317 heads. MS3X

4L80e, 12 bolt, 4.11, Moroso brute strength posi, steel shafts.

Subframe connectors, g-braces, solid body bushes, carbon hood and front bumper, custom door cards, Autometer gauges.


Top
   
 Post subject: Re: Holding up the rear
PostPosted:Mon May 28, 2012 3:05 pm 
Offline
Big Block
User avatar

Joined:Tue Feb 23, 2010 12:40 pm
Posts:3245
Car Details:'79 Camaro, 350 V8
Location:South Bucks
thanks for that, i'll avoid the rear seats part then. Just had another thought - what do you guys think to this:

I have about 5 or 6 2x2x8 lengths of wood. Thinking of maybe laying them all so that they go across the car and touch the lip of the rocker panels.That way the lip of the sheet metal has less weight as it's spread across several beams. Then putting the axle stands so they sit under the lip, across several blocks. Hope that made sense? Will that be safe?

Cheers!

Ray

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").


Top
   
Display posts from previous: Sort by 
Post new topic Reply to topic  [7 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited