The Camaro Club (UK)

Online Community for all Camaro Owners and enthusiasts
It is currently Tue Nov 19, 2024 6:46 pm

All times are UTC




Post new topic Reply to topic  [9 posts ] 
Author Message
 Post subject: Gen 3 Questions
PostPosted:Thu Apr 19, 2012 9:33 pm 
Offline
Big Block
User avatar

Joined:Thu Apr 07, 2011 10:06 pm
Posts:295
Car Details:89 RS V6 Camaro Moggy Traveller with Fiat two litre twincam 35 Standard flying 12 To be Rodded ????
Location:middlesbrough North East
Hi guys could any one tell me where you can get the front Camaro emblem called Header panel emblem best price :crazy: ,also on the rear hatch/tailgate on the inside between the glass and metal panel what covers the transition point mine had a piece of black plastic glued on ,only one side :shock: also if you lift it up mine has two holes drilled in the side just below the spoiler bolt on both sides any one tell me whats missing ? hope you can help Cheers Neil :thumbup:


Last edited by neil.w on Tue Apr 24, 2012 10:52 pm, edited 1 time in total.

Top
   

Gen 3 Questions

Sponsor

Sponsor
 

 Post subject: Re: Gen 3 Questions
PostPosted:Fri Apr 20, 2012 12:04 pm 
Offline
Big Block
User avatar

Joined:Fri Mar 19, 2010 1:35 am
Posts:2566
Car Details:79' camaro road & track day toy. 383 stroker, 5 speed TKO trans, lots of suspension stuff, 13" Vette brakes, 18" wheels.
Location:Luton
I think I've bought emblems in the past from NPD and US ebay.. Has Rocky got any S/H ones ?

_________________
“You only live once, but if you do it right, once is enough.”


Top
   
 Post subject: Re: Gen 3 Questions
PostPosted:Fri Apr 20, 2012 12:13 pm 
Offline
Big Block
User avatar

Joined:Tue Sep 13, 2011 11:46 pm
Posts:202
Car Details:1985 camaro iroc z28 5.0 high output 5 speed manual LSD
Location:KENT
this what your after 8-) 8-)
http://www.ebay.co.uk/itm/1986-7-Camaro ... 1c251d7201
or this :?:
http://www.ebay.co.uk/itm/1986-7-Camaro ... 1c2620800b


Attachments:
badge1.jpg
badge1.jpg [1.52KiB |Viewed 892 times ]
badge.jpg
badge.jpg [1.42KiB |Viewed 892 times ]
Top
   
 Post subject: Re: Gen 3 Questions
PostPosted:Sat Apr 21, 2012 12:25 am 
Offline
Big Block
User avatar

Joined:Thu Apr 07, 2011 10:06 pm
Posts:295
Car Details:89 RS V6 Camaro Moggy Traveller with Fiat two litre twincam 35 Standard flying 12 To be Rodded ????
Location:middlesbrough North East
Thanks for the info guys spot on :clap: any of you third gen guys help with the inside rear hatch/tailgate problem any pics ? :shock: once again Cheers Neil :thumbup: P.S. the 89 Camaro isn,t old enough ? for N.P.D :crazy:


Top
   
 Post subject: Re: Gen 3 Questions
PostPosted:Tue Apr 24, 2012 8:42 pm 
Offline
Big Block

Joined:Fri Jan 02, 2009 11:58 am
Posts:565
Car Details:"Overdose"
Iroc convertible
Custom airride, SLP exhaust, 20" Iroc rims, Mini tubbed, Everything new or uprated.
Corvette C6 Z06 Brakes,
Procharger on the way.
Location:Watford
I think I have a good secondhand one, I might have a brand new GM one but they are quite expensive for original.

_________________
Image


Top
   
 Post subject: Re: Gen 3 Questions
PostPosted:Tue Apr 24, 2012 10:51 pm 
Offline
Big Block
User avatar

Joined:Thu Apr 07, 2011 10:06 pm
Posts:295
Car Details:89 RS V6 Camaro Moggy Traveller with Fiat two litre twincam 35 Standard flying 12 To be Rodded ????
Location:middlesbrough North East
Hi Rocky how good is the second hand one is it good enough to go with new paint ?if not what kind of price is the other one ,also any ideas on how the rear glass to metal panel inside of the hatch is covered (most is covered with big trim panel )just the end sections mine was mainly black silicone and on one end a piece of black plastic :crazy: Cheers Neil. :thumbup:


Top
   
 Post subject: Re: Gen 3 Questions
PostPosted:Wed Apr 25, 2012 8:28 pm 
Offline
Big Block

Joined:Fri Jan 02, 2009 11:58 am
Posts:565
Car Details:"Overdose"
Iroc convertible
Custom airride, SLP exhaust, 20" Iroc rims, Mini tubbed, Everything new or uprated.
Corvette C6 Z06 Brakes,
Procharger on the way.
Location:Watford
Will get some pics for you I have a couple of different ones. There is a plastic cover that goes on the inside of tailgate the plastic bits either side are just to cover the join. Are you planning on splitting the deck lid from the glass as its quite involved.

_________________
Image


Top
   
 Post subject: Re: Gen 3 Questions
PostPosted:Wed Apr 25, 2012 11:02 pm 
Offline
Big Block
User avatar

Joined:Thu Apr 07, 2011 10:06 pm
Posts:295
Car Details:89 RS V6 Camaro Moggy Traveller with Fiat two litre twincam 35 Standard flying 12 To be Rodded ????
Location:middlesbrough North East
I took the tailgate off to clean up the inside and the gutter before paint ,the metal part was out of line i managed to slacken the nuts and tap it back (with the rams off ) and tighten up the nuts ,quite lucky i think :crazy: but it seems to have worked ,on the inside there was only one plastic piece and loads of black silicone it didnt look factory .Cheers mate sort some prices out Neil :thumbup:


Top
   
 Post subject: Re: Gen 3 Questions
PostPosted:Thu Apr 26, 2012 8:28 pm 
Offline
Big Block

Joined:Fri Jan 02, 2009 11:58 am
Posts:565
Car Details:"Overdose"
Iroc convertible
Custom airride, SLP exhaust, 20" Iroc rims, Mini tubbed, Everything new or uprated.
Corvette C6 Z06 Brakes,
Procharger on the way.
Location:Watford
Pmed ya

_________________
Image


Top
   
Display posts from previous: Sort by 
Post new topic Reply to topic  [9 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited