The Camaro Club (UK)

Online Community for all Camaro Owners and enthusiasts
It is currently Fri Nov 01, 2024 4:30 am

All times are UTC




Post new topic Reply to topic  [4 posts ] 
Author Message
 Post subject: Holley Carb Rebuild
PostPosted:Sat Dec 29, 2018 4:57 pm 
Offline
Big Block

Joined:Mon Dec 22, 2008 10:53 am
Posts:306
Car Details:'68 Camaro
'89 Golf Rallye
'97 Golf GTi (Daily)
Location:SE London/Kent
Hi All,

Hope everyone had a good Christmas!

I'm after recommendations of someone who can rebuild a holley 600cfm DP. At the moment, it's being quite a pig, float bowls are sticking, so fuel just generally gets dumped everywhere. Quite happy to remove it and send it away. Ideally it needs setting up on the car, but with the carb in it's current state, it's not viable to drive it far.

On the rebuild stakes, is this something I could do? - I'm not confident that I can jet it properly, but would keep the current ones (which are unknown at this point).

Cheers all,
Mark

_________________
'68 Camaro


Top
   

Holley Carb Rebuild

Sponsor

Sponsor
 

 Post subject: Re: Holley Carb Rebuild
PostPosted:Sun Dec 30, 2018 10:22 pm 
Offline
Big Block
User avatar

Joined:Tue Feb 23, 2010 12:40 pm
Posts:3245
Car Details:'79 Camaro, 350 V8
Location:South Bucks
Hi Mark, good to see you on here. It sounds like something Martin could do, and he could tune it on the car as well to a very nice performance. Would that be an option?

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").


Top
   
 Post subject: Re: Holley Carb Rebuild
PostPosted:Mon Dec 31, 2018 1:08 pm 
Offline
Big Block

Joined:Mon Dec 22, 2008 10:53 am
Posts:306
Car Details:'68 Camaro
'89 Golf Rallye
'97 Golf GTi (Daily)
Location:SE London/Kent
Hi Ray,

Yeah, sorry not been on more often, hope you are well!

Yes, Martin would definitely be able to work his magic, but he's probably far too busy, and also very far away (especially for me to drive the car!). If I had a trailer and suitable tow vehicle, I'd take it over to him without hesitation.

Happy New Year!

Mark

_________________
'68 Camaro


Top
   
 Post subject: Re: Holley Carb Rebuild
PostPosted:Wed Jan 02, 2019 1:10 pm 
Offline
Big Block

Joined:Mon Mar 09, 2009 12:13 pm
Posts:205
Car Details:1979 Camaro
I took apart and rebuilt some Holleys a few years ago. Not too tricky, just needed some carb cleaner and compressed air (in a can or from a compressor) I bought some rebuild kits, as you need some spares (gaskets, needles, jets etc). You might need new floats (difficult to know without seeing them), and you'd need to open up the carb to identify which ones to get.

After the cleanup, there's different aspects to tuning. It's one thing to get it idling nicely (which you can do using vacuum gauges), but harder to tune for on-road usage, as it requires striping it down again if you want to change anything. Not so bad on a rolling road where you can monitor it easily, but otherwise changes are based on driving feel.

Having re-read your post - if it was running OK at one point, you would probably get away with keeping the current jets, which makes it simpler. Just a cleanup, replace the simple bits and see how it goes.


Top
   
Display posts from previous: Sort by 
Post new topic Reply to topic  [4 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited