The Camaro Club (UK)

Online Community for all Camaro Owners and enthusiasts
It is currently Tue Nov 05, 2024 2:34 pm

All times are UTC




Post new topic Reply to topic  [9 posts ] 
Author Message
PostPosted:Mon Feb 29, 2016 8:07 pm 
Offline
Big Block

Joined:Sun Apr 05, 2015 3:08 pm
Posts:65
Car Details:1980 Camaro Berlinetta 305 v8
1993 Cadillac DeVille 4.9 v8
I am currently tearing into my engine bay and tidying everything up and I am sick of starring at that ugly evaporator box sticking out the bulkhead. My question is. Once I get the inner fender out the way to access all the bolts to get the box off what parts am I gonna need to make it a non a/c car? Will I need to get another fan or can I use the current one and just re wire it? What about the heating matrix as the pipes go into the evaporator box? Then I will need to track down one of these blanking panels but I haven't seen any with holes in for the heater pipes. :/


Last edited by Berlinetta-Chris on Mon Feb 29, 2016 9:43 pm, edited 1 time in total.

Top
   

Anyone done a full A/C removal?

Sponsor

Sponsor
 

PostPosted:Mon Feb 29, 2016 8:34 pm 
Offline
Big Block
User avatar

Joined:Tue Feb 23, 2010 12:40 pm
Posts:3245
Car Details:'79 Camaro, 350 V8
Location:South Bucks
Interestingly i saw a post recently about this. I think it was on nastyz28.com. A guy suggested a unit that goes in place of the big ac box and fits a regular heater core in there. That way you get heat still. Will have to try and find the post. Normally the AC delete panels just plug up the hole left after removing the unit, and doesn't leave for the option of running a heater.

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").


Top
   
PostPosted:Mon Feb 29, 2016 9:07 pm 
Offline
Big Block

Joined:Sun Apr 05, 2015 3:08 pm
Posts:65
Car Details:1980 Camaro Berlinetta 305 v8
1993 Cadillac DeVille 4.9 v8
Just forked out on one of these.
http://www.ebay.co.uk/itm/350493926337? ... EBIDX%3AIT
Hopefully I can use the current fan but Pretty sure I just need to drill the holes for the heating pipes. Lots of room it that square bit on the right too. Might hide some stuff in there like the likes of the vacuum ball and electronic ignition box etc. I'm going super simple and tidy with this engine bay after I spray it.


Top
   
PostPosted:Tue Mar 01, 2016 3:24 pm 
Offline
Big Block
User avatar

Joined:Tue Feb 23, 2010 12:40 pm
Posts:3245
Car Details:'79 Camaro, 350 V8
Location:South Bucks
Perfect find, that's the one :thumbup: :thumbup:

While you have everything out, definitely get a brand new fan. The existing one will fit but at 35 years of age, it won't work for much longer and it's such as pain to access, best to switch now for the £20 or so it costs, cheap insurance. I should have changed mine, it has a slight squeak like a hamster wheel, no way am i going to be changing it anytime soon.

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").


Top
   
PostPosted:Tue Mar 01, 2016 6:59 pm 
Offline
Big Block

Joined:Sun Apr 05, 2015 3:08 pm
Posts:65
Car Details:1980 Camaro Berlinetta 305 v8
1993 Cadillac DeVille 4.9 v8
Good idea. I had the inner fenders off today. There was only about 10 bolts or so and you can still leave the wing on to access it. It's not as bad as I thought. Though I better change it anyway. Shame that blank panel was so expensive. I could nearly understand if it was made of metal but 134 quid posted for that piece of plastic lol. Had to be done though.


Top
   
PostPosted:Thu Mar 03, 2016 11:34 am 
Offline
Big Block
User avatar

Joined:Tue Feb 23, 2010 12:40 pm
Posts:3245
Car Details:'79 Camaro, 350 V8
Location:South Bucks
Quote:
I could nearly understand if it was made of metal but 134 quid posted for that piece of plastic lol
Oh, i thought it was metal! That's crazy isn't it.

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").


Top
   
PostPosted:Thu Mar 03, 2016 3:51 pm 
Offline
Big Block
User avatar

Joined:Sat Jun 28, 2014 6:55 pm
Posts:808
Location:Croxley Green, Hertfordshire
I can out crazy that, 4 little plastic wheel center caps about 2" in diameter £85&£20 delivery

_________________
1997 30th Anniversary SS SLP
1993 GMC Typhoon


Top
   
PostPosted:Mon Mar 07, 2016 2:41 pm 
Offline
Big Block
User avatar

Joined:Thu Jul 10, 2008 10:41 am
Posts:827
Car Details:1968 Camaro Racing Car "Butch"
1968 Camaro Convertible 327"Camilla"
1979 AMC CJ7 Jeep 360V8
1980 BMW E21 Alpina B6 2.8
1991 BMW E30 HartgeH26
1958 as yet unrevealed sportsracer with chevV8
Location:Isle of Man and Inverness
We removed the A/C heater unit from Camilla years ago- and replaced all with a standard heater blower unit

I was under the instruction of someone who knew what to do- so can't help much on the practicalities- but it all seems to have worked for past 12 years or so

some day I will fit a Vintage air system......................

_________________
Kind Regards
TopCat
Secretary
Classic Camaro Club
Member of The Association of American Car Clubs UK
Email :tboles@strathnoon.co.uk Websites: http://www.classiccamaroclubuk.com and:
http://www.youtube.com/watch?v=IdhLJtR_ZY4


Top
   
PostPosted:Fri Mar 11, 2016 7:00 am 
Offline
Big Block

Joined:Mon Aug 25, 2014 12:06 pm
Posts:131
Car Details:1971 2nd Gen Camaro
RS, 350ci auto
Location:Devon
Have done two, one on a 3rd gen and just done my second gen.

But, I wouldn't call them 'full' A/C removals as the larger box and additional vents still remain inside. However, the gubbins from the engine bay are removed.

The box you've bought is what you want, but you may also need a new fan (not the motor, the fan itself) as the fan is thinner for the non a/c box.

To make it work in the easiest way you'll need to keep the air resistor, I cut it into the new panel. The relay is needed as well, but the other wires can be safely removed. As can all the pipes / radiator / pump. You'll also need a different belt as it won't go round the pump any more.

The pipes come out around the box you've bought, you don't need to cut holes for them. The thin part after the bulge for the fan, one pipe comes out above it and the other under it. On a second gen anyway as it's the same box I bought. But the mounting holes did't line up that well so needed some tweaking, and don't forget to seal it to the bulkhead or you'll lose fan pressure / power.

This will make it work for direct / heat / fan etc. and clear up the engine bay a treat.

But, you'll be left with a large vacuum controlled box (the non a/c cars were cable driven not vacuum) behind the dash, the extra A/C vents and the A/C contol panel. Which will work, but will still say A/C on it.....That's why I don't call what I've done a 'full' A/C removal.

Hope that all makes sense, let me know if you want more detail :-)


Top
   
Display posts from previous: Sort by 
Post new topic Reply to topic  [9 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited