The Camaro Club (UK)
http://classiccamaroclub.mfatw.com/

Rev counter in 2nd gen
http://classiccamaroclub.mfatw.com/viewtopic.php?f=9&t=2410
Page 1 of 1

Author:  in the dog house [Sun Jul 22, 2012 8:52 pm ]
Post subject:  Rev counter in 2nd gen

Hi all,
was just wondering if anyone out there has had problems with there rev counter, mine is telling me the revs are really high when they're not, for example on tick over its saying 2500 not 800 or whatever it should be.
can they be replaced as a single item or has the whole cluster got to be replaced. can they be calerbrated or any other means of fixing..
its in a 79 Z28.
Cheers
Paul

Author:  chevy-stu [Mon Jul 23, 2012 9:24 am ]
Post subject:  Re: Rev counter in 2nd gen

Depends on the type of distributor you have. I'm not sure about the early external coil types, but later HEI distributors with built in coil have one wire that goes to a module on the bulkhead, this has a wire then goes through the bulkhead into the dash loom.
On mine this wire broke off the module leaving no tach reading, check this wire is connected properly if you have this type .

Author:  78 Camaro [Mon Jul 30, 2012 1:59 pm ]
Post subject:  Re: Rev counter in 2nd gen

have you tried taking your foot off the gas pedal? :mrgreen:
Strange issue that, not sure what could be causing it. Stu could be onto something there. I learnt that jiggling wires about helps identify dodgy wiring / connectors so give it a try and see if you can localise the issue and then we can take it from there.
Cheers!

Author:  in the dog house [Tue Jul 31, 2012 10:44 pm ]
Post subject:  Re: Rev counter in 2nd gen

lol, believe me i've wiggled and jiggled the wires, but just the same. if the weather is good at the weekend i'll have a proper go at it,

Author:  Oddball [Sat Mar 25, 2017 5:46 pm ]
Post subject:  Re: Rev counter in 2nd gen

I have this same issue! But with an auto box I really don't see a problem!

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/