The Camaro Club (UK)

Online Community for all Camaro Owners and enthusiasts
It is currently Thu Nov 14, 2024 5:11 pm

All times are UTC




Post new topic Reply to topic  [23 posts ]  Go to page123Next
Author Message
 Post subject: 2nd gen rear suspension
PostPosted:Sun Jun 26, 2011 11:43 pm 
Offline
Big Block
User avatar

Joined:Tue Feb 23, 2010 12:40 pm
Posts:3245
Car Details:'79 Camaro, 350 V8
Location:South Bucks
So i went to deflate the air shocks (wanted to lower it) as i was sure they were pumped up to raise the car, to find that no air came out :o
Then i added a footpump and gave it some air and could hear the air leaking out of the lines :(
Currently there is a good 4 to 5 inches gap between the top of the tyre and the wheel arch.

So this tells me:

1) the shocks are essentially doing nothing, right?
2) the car will only get higher if i add say, stock shocks, right?

so the questions i hope you guys could help with are:

1) what the f do i do
2) how do i lower it, with it being on leafs?

Thanks in advance for any help!!!

Cheers,

Ray

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").


Top
   

2nd gen rear suspension

Sponsor

Sponsor
 

PostPosted:Mon Jun 27, 2011 5:47 am 
Offline
Big Block

Joined:Mon Oct 05, 2009 10:00 pm
Posts:122
Car Details:tube framed 68 camaro
Location:WHITEHAVEN, CUMBRIA
best method of lowering it is to replace the leaf springs with a set of de-cambered (lower) springs......the cheapest way is to add a set of lowering blocks between the axle and springs.

_________________
I KNOW WHERE YOU LIVE......

Image

I'M JUST TOO DAMNED TIRED TO BOTHER CHASING YOU !


Top
   
PostPosted:Mon Jun 27, 2011 11:39 am 
Offline
Big Block
User avatar

Joined:Fri Mar 19, 2010 1:35 am
Posts:2566
Car Details:79' camaro road & track day toy. 383 stroker, 5 speed TKO trans, lots of suspension stuff, 13" Vette brakes, 18" wheels.
Location:Luton
I'd take the shocks out, or certainly at least disconnect the lower bolt as it's just one bolt.. Then drop the car and see.

The shocks may be jammed or something, if the car still sits high then yes the springs are in unexpectedly good order, and you could lower it by removing a middle leaf, or replacing with proper lowered set (Hotckis, PTFB etc.. )

_________________
“You only live once, but if you do it right, once is enough.”


Top
   
PostPosted:Mon Jun 27, 2011 2:23 pm 
Offline
Big Block
User avatar

Joined:Tue Feb 23, 2010 12:40 pm
Posts:3245
Car Details:'79 Camaro, 350 V8
Location:South Bucks
Thanks both!

Biff, good shout on the lowering blocks, i have seen these before and wonder if anyone has had experience with these before?

The springs were replaced a few years ago and they are in good condition which is probably why they hold the car up as you mention Stu. I'm a little reluctant to change the springs because they are newish (like the idea of lowering blocks) , but i don't even know if they are right for the car, as they make it sit so high compared to other 2nd gens i've seen.

I'm going to look into lowering springs, but last remember they only gave a drop of about 1-2 inches, attached a few pics below so i'm a bit worried to shell out if it still sits high - want the arch just about touching the tyre, so need a good 4" over what ever is there.

Pics below :)

Would love any more advice you guys can give!

Thanks,

Ray


Attachments:
IMG_1250a.jpg
IMG_1250a.jpg [1.36MiB |Viewed 2333 times ]
IMG_1246.JPG
IMG_1246.JPG [1.93MiB |Viewed 2331 times ]

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").
Top
   
PostPosted:Mon Jun 27, 2011 2:57 pm 
Offline
Big Block
User avatar

Joined:Fri Mar 19, 2010 1:35 am
Posts:2566
Car Details:79' camaro road & track day toy. 383 stroker, 5 speed TKO trans, lots of suspension stuff, 13" Vette brakes, 18" wheels.
Location:Luton
If the leafs are fairly new that explains why it doesn't drag it's arse like most Camaros on original springs..

The springs aren't that pricey, but if yours are newish I'd keep them. Apparently it's not too hard to remove a leaf from the multileaf. You just need to remove the spring and bend back the clips holding the leafs together, remove one, and bend 'em back. The 2nd longest is best I've been told.

It's hard to guess how low it will sit, even fitting lowering springs as everyone seems to end with slightly different results with the same products from what I've seen.
I've got the Hotchkis leafs and it sits about here on mine.. about 1/2 inch space to the arch from the tyre.
Image

(I'd also fit some proper big U-bolts instead of the T-bolts, and flatten out that spring pad..Looks very bent)

_________________
“You only live once, but if you do it right, once is enough.”


Top
   
PostPosted:Tue Jun 28, 2011 11:09 am 
Offline
Big Block
User avatar

Joined:Tue Feb 23, 2010 12:40 pm
Posts:3245
Car Details:'79 Camaro, 350 V8
Location:South Bucks
Thanks for the advice Stu, you picked up on a few things i wasn't sure about too :)

I did wonder about the T -bolts, i've only ever seen U bolts! And the spring seats - i didn't know what they should look like so assumed this was how they were - thanks for point out :)

I do think that the effort of taking out a spring on each side, redoing the clips, redoing the spring seat, getting u bolts etc, which may only lower it a small amount, may as well (from lessons learnt with this car over the year) go for the full monty and whack on a rear anti roll bar while we are there.

Looks like it may be something once the car is on the road, need to get it on the road sooner that later now.

You're ride height is pretty spot on :) looks great how the arches brow the tyres, just how it should be!

Thanks or advice, looks like there will be some suspension replacement later this year.

cheers!

Ray

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").


Top
   
PostPosted:Tue Jun 28, 2011 11:32 am 
Offline
Big Block
User avatar

Joined:Fri Mar 19, 2010 1:35 am
Posts:2566
Car Details:79' camaro road & track day toy. 383 stroker, 5 speed TKO trans, lots of suspension stuff, 13" Vette brakes, 18" wheels.
Location:Luton
If your springs have been changed a few years ago, it shouldn't be too hard to take them out and modify, and it definately will drop by removing a leaf, how much is a gamble, but so are new springs.
It's a free mod that's all and saves you buying parts, so only your labour cost.

Here's a pic I took couple of months ago of my new rear adjustable sway bar showing the spring pads, excuse the surface rust on the axle, and the leafs are only 3 years old so not painted to well by Hotchkis.
Image

_________________
“You only live once, but if you do it right, once is enough.”


Top
   
PostPosted:Tue Jun 28, 2011 2:12 pm 
Offline
Big Block
User avatar

Joined:Tue Feb 23, 2010 12:40 pm
Posts:3245
Car Details:'79 Camaro, 350 V8
Location:South Bucks
Cheers Stu, picture helps a lot!

I think i will give that shot then, place near me should be able to supply the U bolts. I guess a standard high tensile stainless steel set should do the job?

I need to replace the shocks too, are you running the standard ones on yours? Thinking of gas - adjust shocks, would like Konis but too much $$$ i think.

What rear sway bar is that? while i have the stuff off i may aswel add this at the same time, any you would recommend in particualr?

My application is road / semi track. I would like to take it down the drag strip a couple of times and around a track too, but mainly use it as a cruiser, so i don't think i need too much in regards to suspension technology - just a step up from stock would be ideal :)

Thanks again!

Ray

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").


Top
   
PostPosted:Tue Jun 28, 2011 6:34 pm 
Offline
Big Block
User avatar

Joined:Fri Mar 19, 2010 1:35 am
Posts:2566
Car Details:79' camaro road & track day toy. 383 stroker, 5 speed TKO trans, lots of suspension stuff, 13" Vette brakes, 18" wheels.
Location:Luton
I'm running Koni 3-position adjustable shocks all round. Minimum I'd reckon would be decent gas shocks. The Edelbrock IAS get a good rating in the states, and are cheaper than the Konis.
The rear sway bar is a Pro Touring F body 3 position adjustable. This may be overkill for what you want, so a set of Z28 bars (1 1/4" front and 7/8" rear) will work well...

Don't forget new bushes too.
(I've still got my special spherical front leaf eye ones to fit)

_________________
“You only live once, but if you do it right, once is enough.”


Top
   
PostPosted:Sat Jul 02, 2011 12:16 pm 
Offline
Big Block

Joined:Sun Jun 19, 2011 8:10 pm
Posts:82
Car Details:1979 Z/28 / 408 CID/ M-22 / 3:73 Eaton Posi, yada, yada, yada
You can have the springs re-arched since they aren't terribly old. Any decent spring shop can do that, and also adjust the spring rates...it's nice when they are the same on both sides! Your left shock plate is badly bent. Take it out, straighten it and check to make sure it's not cracked. What I did on mine was to completely disassemble the springs, sandblasted them and then took the whole mess to a spring shop. Had them re-arch them to lower it about 2-inches and installed new pads & clamps. I then went to Global West and had their "CAT-5" sperical bearings installed--the CAT-5 system uses sperical bearings on both eyes, which have to be welded in. I've attached a few photos to show what this looks like. Believe it or not, the engineer I have been working with at Global West recommends that you do not use rear sway bar with this system. Another modification you can perform with little difficulty is to modify the front spring bracket. Essentially, you move the spring mount holes upward by 3/4" and then open the top of the bracket for spring eye clearance. The purpose is to increase anti-squat. Most folks running autocross or road racing cars do this. I'd suggest that you Google "Herb Adams Modification" and look through the articles. You'll find pictures of how it's done. Some reinforcement is needed on the sides, because it does weaken the bracket. Hope some of this helps.

Dana


Attachments:
File comment:Front spring eye and spherical bearing installed. Having these on both ends (instead of just the front like the Hotchkis version) allows the spring to articulate as the rear axle moves...this keeps the wheels perpendicular to the pavement, maintaining a larger contact patch which enhances handling--greatly. GW does NOT recommend a rear sway bar with this system.
100.JPG
100.JPG [363.1KiB |Viewed 2322 times ]
File comment:Same shot--the flash on my camera has a mind of it's own
099.JPG
099.JPG [360.68KiB |Viewed 2319 times ]
File comment:Rear spring eye--GW CAT-5 bearing with GW shackle. Upper bushing is delrin with an aluminum sleeve and ZIRC fitting for lubrication (GW calls this "Del-Alum"). Note how the spring is tilted slightly.
098.JPG
098.JPG [394.07KiB |Viewed 2319 times ]
File comment:Believe it or not, this is the original factory F-41 spring--after being completely rebuilt.
101.JPG
101.JPG [384.47KiB |Viewed 2317 times ]
File comment:The screwdriver is pointing to the location where these will crack--this one has been repaired and powder coated.
102.JPG
102.JPG [382.21KiB |Viewed 2319 times ]
Top
   
Display posts from previous: Sort by 
Post new topic Reply to topic  [23 posts ]  Go to page123Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 45 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited