The Camaro Club (UK)
http://classiccamaroclub.mfatw.com/

THIRD GEN BRAKEPIPES
http://classiccamaroclub.mfatw.com/viewtopic.php?f=9&t=2022
Page 1 of 1

Author:  camaro85iroc [Sun Oct 23, 2011 8:34 pm ]
Post subject:  THIRD GEN BRAKEPIPES

DOES ANYONE KNOW WHAT SIZE THE BRAKE PIPE IS THAT RUNS FROM THE FRONT TO THE BACK OF THE CAR???? :shock: :shock: :shock: (MASTER CYLINDER TO FLEXI HOSE ON BACK AXLE)
THE REAR AXLE IS 3/16" BUT THIS PIPE SEEMS TO BE OF A LARGER DIAMETER ,AND SEEING AS IT RECENTLY SHEARED OFF WHEN I REMOVED THE FLEXI PIPE IT NEEDS REPLACING WITH COPPER BUT AM NOT SURE WHAT SIZE IT IS :? :? :? :? :? :?
HELP :crazy: :crazy: :crazy: :crazy:

Author:  wanderingkurt [Mon Oct 31, 2011 8:29 pm ]
Post subject:  Re: THIRD GEN BRAKEPIPES

i have the first gen and no experience with third gen but there are only a few common brake line sizes. I am pretty sure it will be 1/4".

kurt

Author:  neil.w [Thu Nov 10, 2011 10:32 pm ]
Post subject:  Re: THIRD GEN BRAKEPIPES

Hi sorry i have left it so long to reply :crazy: but im doing some renovation work at home and my car has ten ton of gear stacked all around it :crazy: ,so i jacked up the rsend to check brake pipe size for you it is 1/4 i first check of the master cylinder also 1/4 .My 3rd gen is a 89 but its a v6 with drums out back i woulndt think this would make much difference but not sure ,Cheers Neil P.S. if allready sorted lets know the outcome :thumbup:

Author:  neil.w [Mon Nov 14, 2011 10:45 pm ]
Post subject:  Re: THIRD GEN BRAKEPIPES

Hi hope the above info was of any use if not let us know what size your brake pipes are Cheers Neil :thumbup:

Author:  camaro85iroc [Wed Nov 16, 2011 2:34 pm ]
Post subject:  Re: THIRD GEN BRAKEPIPES

cheers mate(s) when i finally got the pipe off and took it into my local motor factors it was indeed 1/4",
had to re-use the master cylinder connector as they did'nt have one that big but it was servicable and the rear end connector was of a smaller size and they had that in stock,all in all it only cost £8.00 which i thought was very reasonable as it was over 12 foot long,so thanks for your help :thumbup: :thumbup: :thumbup: :thumbup: :thumbup: :thumbup:

Attachments:
File comment:new pipe fitted
brakepipe.jpg
brakepipe.jpg [492.28KiB |Viewed 858 times ]

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/