The Camaro Club (UK)

Just wondering - i have 10.5" steel wheels in chrome and the backspacing is 4". There is minimal clearance to the outer lip and i'd like to tuck the wheel in more (ideally be 1.5", maybe even 1.75"). Is there a place that would be able to separate the drum from the mounting face and reweld? I had a jeep once that i was told had reversed rims (stock steel wheels and they cut the welds and rewelded for a deep dish). Was done before i got it but didn't appear to have an issue. I've got 7.5" rims on there now with a 255 but it looks a bit too tucked in. Thinking of getting 1" spacers, but then i thought about doing something to the wheels as i can't really use them the way they are. Cheers!

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").

A lot of the Veedub guys use 'banded' steel wheels, so maybe search a few Beetle type places... Might not be economically viable tho..

_________________
“You only live once, but if you do it right, once is enough.”

Thanks Stu, i'll see if i can find a place and find out their costs to see if it's worthwhile. The wheels are good but just don't have enough backspace (4"). I'll report back if i find anything decent...

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").