The Camaro Club (UK)

Online Community for all Camaro Owners and enthusiasts
It is currently Fri Nov 22, 2024 10:28 am

All times are UTC




Post new topic Reply to topic  [6 posts ] 
Author Message
 Post subject: Painting Stipes etc
PostPosted:Wed Jun 13, 2012 9:31 am 
Offline
Small Block

Joined:Tue Jun 12, 2012 12:43 pm
Posts:34
Quick question, in order to paint stripes or anything of the sort, can you paint that straight onto the existing layer of paint or does the entire pannel need a respray in their respective colours?


Top
   

Painting Stipes etc

Sponsor

Sponsor
 

 Post subject: Re: Painting Stipes etc
PostPosted:Wed Jun 13, 2012 12:55 pm 
Offline
Big Block

Joined:Thu Jul 21, 2011 2:16 pm
Posts:815
Car Details:1980 2nd Gen, 6.0 iron block LS, 4.11 12 bolt axle, Brute Strength Posi, Lowered 2", sub frame connectors, G-braces, Carbon hood and front bumper cover
Location:Norfolk
If you want to do it properly then you should repaint the whole panel. :thumbup:

_________________
My '80 progress thread - hugger orange! Now with LQ9 power - forged pistons, LS2 rods, 236/242, .621/.612, flowed and milled 317 heads. MS3X

4L80e, 12 bolt, 4.11, Moroso brute strength posi, steel shafts.

Subframe connectors, g-braces, solid body bushes, carbon hood and front bumper, custom door cards, Autometer gauges.


Top
   
 Post subject: Re: Painting Stipes etc
PostPosted:Thu Jun 14, 2012 11:13 pm 
Offline
Big Block
User avatar

Joined:Thu Apr 07, 2011 10:06 pm
Posts:295
Car Details:89 RS V6 Camaro Moggy Traveller with Fiat two litre twincam 35 Standard flying 12 To be Rodded ????
Location:middlesbrough North East
Hi Jonny it depends on what you are going to paint and on top,if you are painting ontop of good paint it could bee masked up flatted then sprayed ,if you are spraying on top of clear you could flatt off all clearcoat spray stripes ect then claercoated over the top this will loose the edge of stripes . But if you look at the paint job on evilzee28 (aka Nige ) not clearcoated and looks the dogs doodaaas . :thumbup: so your best bet is to see what you are going to paint and ontop of and speak to your paint shop or bodyman .If i was a bit better on computers i would put the pics of Niges car for you as its something to see ,someone will possibley do it for you .Cheers Neil :thumbup: P.S. welcome to the site .


Top
   
 Post subject: Re: Painting Stipes etc
PostPosted:Fri Jun 22, 2012 7:00 am 
Offline
Big Block
User avatar

Joined:Mon Feb 09, 2009 12:41 pm
Posts:2451
As if by magic


Image


Image

If you look at my build thread here

http://www.classiccamaroclubuk.com/phpB ... f=11&t=151

there's a bit about how I painted the stripes on hth. if you've got any queries just ask & i'll try to help. What sort of stripes are you thinking about?

cheers....Nige

ps Thanks for the compliments Neil, appreciated :thumbup:

_________________
Too much power...not enough hands!!


Top
   
 Post subject: Re: Painting Stipes etc
PostPosted:Fri Jun 22, 2012 10:25 pm 
Offline
Big Block
User avatar

Joined:Thu Apr 07, 2011 10:06 pm
Posts:295
Car Details:89 RS V6 Camaro Moggy Traveller with Fiat two litre twincam 35 Standard flying 12 To be Rodded ????
Location:middlesbrough North East
Hi Jonny i hope the pics of Nige,s car answers your question Cheers Neil :thumbup: P.S. Nice to see you back Nige :clap: P.P.S How,s your house coming on . :crazy:


Top
   
 Post subject: Re: Painting Stipes etc
PostPosted:Sat Jun 23, 2012 6:59 am 
Offline
Big Block
User avatar

Joined:Mon Feb 09, 2009 12:41 pm
Posts:2451
Quote:
Hi Jonny i hope the pics of Nige,s car answers your question Cheers Neil :thumbup: P.S. Nice to see you back Nige :clap: P.P.S How,s your house coming on . :crazy:

Hi Neil, i didn't think anyone would notice i wasn't here for a while :lol: . Well, as you asked, the house is fighting me all the way. The flat roof on the annexe has developed a leak which I can't find & I discovered that when I took an internal doorframe out there was no lintel holding up the roof. TBH though that pales into insignificance to the fact that after having had radio therapy for lung cancer, my mother in law contracted pneumonia, followed by a heart attack followed by her kidneys failing. We were told last Wednesday she wouldn't make it through the night. Thankfully, she has miraculously recovered & came home from hospital last night. That's why I've not been on here for a while as the family thing had to come first.

Anyway, back on topic, I've got a brand new stencil for the hockey stick stripe on a '69 if anyone needs one as it's surplus to my requirements.

cheers...Nige

_________________
Too much power...not enough hands!!


Top
   
Display posts from previous: Sort by 
Post new topic Reply to topic  [6 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited