| The Camaro Club (UK) http://classiccamaroclub.mfatw.com/ |
|
| Geometry specs ??? http://classiccamaroclub.mfatw.com/viewtopic.php?f=6&t=4357 |
Page 1 of 1 |
| Author: | z28stu [Mon Mar 02, 2015 10:08 pm ] |
| Post subject: | Geometry specs ??? |
Hey chaps anybody know or can point me to a site that has the front steering geometry specs for the later ls1 4th gens toe/camber/caster etc I found a bit of play in one track rod end  Ive drawn a blank in trying to find the specs any help greatfully recieved  Cheers Stu |
|
| Author: | Z28DUNC [Tue Mar 03, 2015 10:18 am ] |
| Post subject: | Re: Geometry specs ??? |
Would a proper garage with laser alignment have the specs on a computer program? They sold Camaros from Vauxhall dealerships in the UK so you would think someone would have the specs over here. |
|
| Author: | 3rdGenmalc [Tue Mar 03, 2015 12:50 pm ] |
| Post subject: | Re: Geometry specs ??? |
If you have a Haynes or Chiltern it will be in there. |
|
| Author: | maudyZ28 [Tue Mar 03, 2015 7:14 pm ] |
| Post subject: | Re: Geometry specs ??? |
there are some specs in a link from sam strano floating about, was gonna say ill look, but found them  LF and RF Camber: -2.5 degrees Toe was slightly out Caster: 4.5 degress Now this is for autocross + handling Basically though you want as much on the caster adjustment as possible +ve, i always run this, then set the camber, prob anywhere from -0.3 to -1 depending on how you like the car to handle and how much you want to scrub the tyres off for no returns if you dont track race the car. toe aeound zero, or adjusted as necessary if the car tram lines
|
|
| Author: | z28stu [Tue Mar 03, 2015 9:04 pm ] |
| Post subject: | Re: Geometry specs ??? |
Quote: Would a proper garage with laser alignment have the specs on a computer program? They sold Camaros from Vauxhall dealerships in the UK so you would think someone would have the specs over here.
You would think so Dunc hey but the local digital 4wheeler guys who i have known for years through work said if i can get the specs they can put them onto there machine  Quote: If you have a Haynes or Chiltern it will be in there.
I have a Haynes book malc but no specs GrrrrQuote: there are some specs in a link from sam strano floating about, was gonna say ill look, but found them
LF and RF Camber: -2.5 degrees Toe was slightly out Caster: 4.5 degress Now this is for autocross + handling Basically though you want as much on the caster adjustment as possible +ve, i always run this, then set the camber, prob anywhere from -0.3 to -1 depending on how you like the car to handle and how much you want to scrub the tyres off for no returns if you dont track race the car. toe aeound zero, or adjusted as necessary if the car tram lines Thanks for yer info maudy What i should do is do the tracking myself with our laser super tracker but wouldnt mind a proper 4wheeler done
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|