The Camaro Club (UK)

I just had the underneath of my 1997 Camaro Waxoyled today. When I went to collect it I was shown where the front passengerside mount was broken and and that some of the bolts were missing.

It appears to have been broken for some time but the car passed its MOT in late July and has done only around 600 miles since then.

Is there somewhere in the UK that has or can source a single mount or pair? I will need to have a set of new nuts and bolts as well. Are these items metric sizes? Arrows 1 and 2 point to bolts that attach to the mount and I need the bolts that attach the mount to the chassis. Arrow 3 points to where a bolt is missing.

As I have worked out to upload images I have included one of my car from the summer.

You might try Bauer Millet in Manchester for stock parts.
http://www.bauer-millett.com/servicing-and-parts/

BTW your fixings are metric, I would reckon the motor too.

hey I can have a look as I may have a spare around you can have for next to nothing...if I can find it.

When I rebuilt the front end on mine I know the bolts all seemed a random sized (heads and threads) so played the what came out can go back in game. I'll see if I have any of those lying about too. I'll be back in UK where my car is at the weekend

_________________
'99 Z28 A4, 253 LS2 heads, 228R TSP cam, Patriol Dual Springs, Double roller timing chain, LS6 ported oil pump, OBX LTs, 3" True Duals, LS6 intake, 42lb/hr injectors, SLP lid + bellow, EFIlive COS 3 Speed Denisty Tune (self tuned), 3200 Circle D stall, CAI mod, KYB AGXs, Eibach Pro Front Springs, UMI panhard, LCA + Brackets, Strut Brace, Custom Subframe connectors, WS6 axle with 3.42s, 18" American Racing Rebels, US mirrors, 93 tail lights, 3.5 inch custom cowl hood. Mickey T's Street DRs on Vette-ZR1 wheels for the strip !
Best ET: 12.0 @ 116 mph (on a 0-60ft of 1.8 s)

Brill thanks for the info and the offer on the part.

hey, so ive had a good look and i've got plenty of rear sway bar parts from an axle hange but dont have the front mount, seems I didnt take it off the scrap car I had a while back, sorry dude

_________________
'99 Z28 A4, 253 LS2 heads, 228R TSP cam, Patriol Dual Springs, Double roller timing chain, LS6 ported oil pump, OBX LTs, 3" True Duals, LS6 intake, 42lb/hr injectors, SLP lid + bellow, EFIlive COS 3 Speed Denisty Tune (self tuned), 3200 Circle D stall, CAI mod, KYB AGXs, Eibach Pro Front Springs, UMI panhard, LCA + Brackets, Strut Brace, Custom Subframe connectors, WS6 axle with 3.42s, 18" American Racing Rebels, US mirrors, 93 tail lights, 3.5 inch custom cowl hood. Mickey T's Street DRs on Vette-ZR1 wheels for the strip !
Best ET: 12.0 @ 116 mph (on a 0-60ft of 1.8 s)

No worries and thanks for looking. I contacted a supplier and they say they can supply after Christmas.

could be what you want

http://www.ebay.co.uk/itm/Camaro-1998-F ... 58ace3c96f

_________________
'99 Z28 A4, 253 LS2 heads, 228R TSP cam, Patriol Dual Springs, Double roller timing chain, LS6 ported oil pump, OBX LTs, 3" True Duals, LS6 intake, 42lb/hr injectors, SLP lid + bellow, EFIlive COS 3 Speed Denisty Tune (self tuned), 3200 Circle D stall, CAI mod, KYB AGXs, Eibach Pro Front Springs, UMI panhard, LCA + Brackets, Strut Brace, Custom Subframe connectors, WS6 axle with 3.42s, 18" American Racing Rebels, US mirrors, 93 tail lights, 3.5 inch custom cowl hood. Mickey T's Street DRs on Vette-ZR1 wheels for the strip !
Best ET: 12.0 @ 116 mph (on a 0-60ft of 1.8 s)

My sway bar is 30mm so can't use it. Pity as it is well priced. Thanks for letting me know.

Here are some 30mm at Summit, $17.97.

http://www.summitracing.com/int/parts/e ... /overview/

If you do upgrade to Polyurethane, do the rears too.