The Camaro Club (UK)

Hi all being new to this car,I wonder if anyone can help?
I have a wiper motor that works intermitantly,so I went hunting on ebay and got a s/h motor that works, apparently from a z28 stripped things down and fitted it but im now having real problems refitting things as when I put the linkage back on the motor it keeps popping the linkages, I had to take the linkage arm from my original motor as the new one was bent in transit, my suspicion is I have messed up the park setting, anyone help?.

Have you tried posting this on some of the American Z28 sites? Might have a few more replies!

ok changed my motor last week first make sure you turn wiper control to the slowest interitent position let it stop then turn ignition off on your motor there is a star bolt undo then move top section round till park arm is 4-8 mm from tab tighten bolt back up hope this helps