The Camaro Club (UK)

Online Community for all Camaro Owners and enthusiasts
It is currently Fri Nov 22, 2024 11:36 am

All times are UTC




Post new topic Reply to topic  [6 posts ] 
Author Message
PostPosted:Mon Nov 10, 2014 6:35 pm 
Offline
Small Block

Joined:Fri Nov 20, 2009 11:09 am
Posts:43
Car Details:1995 Camaro Z28 - SOLD
The original remote fob (only had 1) that cam with my 95 gave up the ghost ages ago. I found a used replacement on US ebay, that included how to lik it to the car. The fob arrived but I couldn't get it to link with new batterys so assumed I'd got a duff.
I bought another from a different seller but again cant get it to link ?? I tried the working unit from my 96 Caprice but same thing ??

The instructions say use a paperclip ect but has anybody actually got it to work ? Or can offer different instructions ?

_________________
The doors open, but the ride it aint free.


Top
   

Linking another remote key fob ?

Sponsor

Sponsor
 

PostPosted:Tue Nov 11, 2014 11:10 am 
Offline
Big Block
User avatar

Joined:Tue Mar 17, 2009 1:36 pm
Posts:91
Car Details:1995 Camaro z28 manual
Land Rover Discovery 2
Various motorbikes...

1996 Camaro Z28 manual -SOLD
1997 Camaro Z28 SS manual -SOLD
1996 ChevyVan - SOLD
Location:Surrey
Quote:
The original remote fob (only had 1) that cam with my 95 gave up the ghost ages ago. I found a used replacement on US ebay, that included how to lik it to the car. The fob arrived but I couldn't get it to link with new batterys so assumed I'd got a duff.
I bought another from a different seller but again cant get it to link ?? I tried the working unit from my 96 Caprice but same thing ??

The instructions say use a paperclip ect but has anybody actually got it to work ? Or can offer different instructions ?
I programmed a new fob for my 95 car, I can't remember exactly what I did, but it did involve jumping two contacts together somewhere.

Both my new and old fobs have the same issue of a ludicrously short range. I have to hold it right in the middle of the door window and even then it often doesn't work. new batteries and change of fob didn't help.


Top
   
PostPosted:Wed Nov 12, 2014 8:05 am 
Offline
Small Block

Joined:Fri Nov 20, 2009 11:09 am
Posts:43
Car Details:1995 Camaro Z28 - SOLD
Thanks Jim, maybe I'll just stick with the good ol' key lol

_________________
The doors open, but the ride it aint free.


Top
   
PostPosted:Wed Nov 12, 2014 10:22 am 
Offline
Big Block
User avatar

Joined:Sat Jun 28, 2014 6:55 pm
Posts:808
Location:Croxley Green, Hertfordshire
My 96 has a factory alarm, not sure if this is what you are on about? To programme it you need to remove the radio fuse and complete a few minor tasks but I guess it must be different to yours as I have never heard of using a safety pin, I can find a link somewhere if you want? My alarm fobs were worse than useless with no range as previously suggested so I got another off of flea bay and swapped some innsides about. When you take them apart there are 3 parts , the outer case, pcb and rubber finger pad. The rubber finger pads have some sort of carbon on the back that makes the contact across the terminals when pressed and this wears out and causes the problems as its a poor connection. Just changing the rubber insert has made my fob work from 10meters away now whereas before I would point it at the middle of the window from a few inches away and press or hold it and have to wait on one fob, the other wouldn't even open the doors but would just about lock it and now works perfectly as well

_________________
1997 30th Anniversary SS SLP
1993 GMC Typhoon


Top
   
PostPosted:Fri Nov 14, 2014 3:28 pm 
Offline
Big Block
User avatar

Joined:Tue Mar 17, 2009 1:36 pm
Posts:91
Car Details:1995 Camaro z28 manual
Land Rover Discovery 2
Various motorbikes...

1996 Camaro Z28 manual -SOLD
1997 Camaro Z28 SS manual -SOLD
1996 ChevyVan - SOLD
Location:Surrey
Quote:
My 96 has a factory alarm, not sure if this is what you are on about? To programme it you need to remove the radio fuse and complete a few minor tasks but I guess it must be different to yours as I have never heard of using a safety pin, I can find a link somewhere if you want? My alarm fobs were worse than useless with no range as previously suggested so I got another off of flea bay and swapped some innsides about. When you take them apart there are 3 parts , the outer case, pcb and rubber finger pad. The rubber finger pads have some sort of carbon on the back that makes the contact across the terminals when pressed and this wears out and causes the problems as its a poor connection. Just changing the rubber insert has made my fob work from 10meters away now whereas before I would point it at the middle of the window from a few inches away and press or hold it and have to wait on one fob, the other wouldn't even open the doors but would just about lock it and now works perfectly as well
the 95 has a more basic set up than the 96.


Top
   
PostPosted:Sat Nov 29, 2014 4:13 pm 
Offline
Big Block

Joined:Sun Jul 25, 2010 3:40 pm
Posts:206
Location:Roswell New Mexico
http://blog.keylessentryremotefob.com/2 ... emote.html


Top
   
Display posts from previous: Sort by 
Post new topic Reply to topic  [6 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited