I have the Heman Hedders for 3rd gen plus the Y pipe.
They are really well made and are a good fit, easy to install.
I´ve tried to post pics but it just won´t work....
| The Camaro Club (UK) http://classiccamaroclub.mfatw.com/ |
|
| Headers http://classiccamaroclub.mfatw.com/viewtopic.php?f=5&t=3737 |
Page 1 of 1 |
| Author: | hotspa [Sat Feb 22, 2014 4:08 pm ] |
| Post subject: | Headers |
Start of my next job I want a set of headers, I know Rocky does the stainless works ones but they are expensive $900 from sumit not sure if Rocky is cheaper Has anyone fitted hooker or headman headers and if so where did they buy them from? I am going to mate them to a similar set up to the stainless works side burner that I want to get made in uk Will fit it into the ground effects Help appreciated Ian |
|
| Author: | 3rdGenmalc [Sat Feb 22, 2014 5:40 pm ] |
| Post subject: | Re: Headers |
I have the Heman Hedders for 3rd gen plus the Y pipe. They are really well made and are a good fit, easy to install. I´ve tried to post pics but it just won´t work....
|
|
| Author: | Andy-d [Sat Feb 22, 2014 6:14 pm ] |
| Post subject: | Re: Headers |
Looking at buying the Hedman ones from John Wolfe Racing on eBay, they come in at about £400 in total. |
|
| Author: | Rocky [Sat Feb 22, 2014 7:30 pm ] |
| Post subject: | Re: Headers |
Can't stand hedmans fitted loads of them and they are not as good as hookers. Stainless works are the best but are pricey. |
|
| Author: | Andy-d [Sat Feb 22, 2014 10:03 pm ] |
| Post subject: | Re: Headers |
Do Hooker to a direct fit set of headers with a Y pipe. |
|
| Author: | hotspa [Sun Feb 23, 2014 10:21 am ] |
| Post subject: | Re: Headers |
I am not bothered with the y pipe as going down a different route. Rocky I agree with you the stainless works are the best, what's the price from you ? |
|
| Author: | hotspa [Sun Feb 23, 2014 10:22 am ] |
| Post subject: | Re: Headers |
Where is the best place for the hooker headers and how much roughly ? |
|
| Author: | hotspa [Fri Mar 07, 2014 6:39 am ] |
| Post subject: | Re: Headers |
Anyone else got any thoughts on headers and where to get them? Not getting very far despite several hours on the inter web |
|
| Author: | 3rdGenmalc [Fri Mar 07, 2014 10:20 am ] |
| Post subject: | Re: Headers |
I use Summit mostly, big inventory, decent prices, no middle man to pay. |
|
| Author: | Andy-d [Sun Mar 09, 2014 6:47 pm ] |
| Post subject: | Re: Headers |
Hooker Street ones, which should be a direct fit: http://www.summitracing.com/dom/parts/h ... /overview/ Hooker Y pipe to suit: http://www.summitracing.com/dom/parts/h ... /overview/ Those two, using iParcel which takes into account customs and duty = $1,349.71 (£806.95) |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|