| The Camaro Club (UK) http://classiccamaroclub.mfatw.com/ |
|
| wheel bolt pattern http://classiccamaroclub.mfatw.com/viewtopic.php?f=5&t=3293 |
Page 1 of 1 |
| Author: | DAVID BROWN [Sun Jul 21, 2013 11:20 pm ] |
| Post subject: | wheel bolt pattern |
What is the bolt pattern for the wheels please. 5x? Ive heard that BMW wheels fit, is this correct. Thanks |
|
| Author: | 3rdGenmalc [Mon Jul 22, 2013 6:14 am ] |
| Post subject: | Re: wheel bolt pattern |
The pattern is 5 on 4 3/4". |
|
| Author: | Rocky [Mon Jul 22, 2013 8:19 am ] |
| Post subject: | Re: wheel bolt pattern |
BMW wheels do fit but are slightly out. You will need the correct offset. |
|
| Author: | chevy-stu [Mon Jul 22, 2013 10:52 am ] |
| Post subject: | Re: wheel bolt pattern |
Our cars are 5 x 120.3mm approx, BMW is 5 x 120mm, so only 0.3 of a millimetre difference.. As the Chevy wheel centre bore is 70.3 mm, BMW wheels are either 74.1 or 72.5mm. I'd strongly recommend using spigot rings if using BMW rims, or the wheel is only hanging on the nuts not the hub. You used to be able to can get them on ebay for about £10, so centre the wheel properly. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|