| The Camaro Club (UK) http://classiccamaroclub.mfatw.com/ |
|
| LOCATION OF VSS BUFFER BOX http://classiccamaroclub.mfatw.com/viewtopic.php?f=5&t=3250 |
Page 1 of 1 |
| Author: | DAVID BROWN [Sun Jul 07, 2013 5:54 pm ] | ||
| Post subject: | LOCATION OF VSS BUFFER BOX | ||
Im am looking for the Yellow buffer box so i can check the signal from the VSS to see if this is working, and i cant find it. I believe it should be on the passenger side close to the ECM. Next to the ECM is a black box with what looks like a circuit board inside. Has anyone got a photo of the buffer box in situ so i can have another look. Thanks
|
|||
| Author: | 3rdGenmalc [Tue Jul 09, 2013 5:56 pm ] |
| Post subject: | Re: LOCATION OF VSS BUFFER BOX |
Found this on ThirdGen.org. http://www.thirdgen.org/techboard/trans ... ation.html "The "VSS Buffer" is under the dash at knee level, just above the large kick panel that covers the under side of the passenger side dash...It is a small, white box with a connector. It is not really by the ECM, but over to the left a bit..." More to consider.... http://www.thirdgen.org/techboard/elect ... peedo.html I used to be on that forum but it is very slow on responses. |
|
| Author: | 3rdGenmalc [Tue Jul 09, 2013 6:02 pm ] |
| Post subject: | Re: LOCATION OF VSS BUFFER BOX |
Do Google image search.....vss buffer box 1992 RS camaro If it is the vss that is screwed RockAuto have them. 34 - 55 €uros, take your pick. Fixya "Hi, I'm not familiar with the part, but the diagram shows it behind the glove box next to the ECM. Go in thru the bottom--remove the sound barrier, remove the EMC, then remove the buffer. What I recommend is to see if you can get one at a salvage yard. Otherwise, they are about $50 on eBay. Thanks for using FixYa." http://www.fixya.com/cars/t8626606-1992 ... tbi_speedo |
|
| Author: | DAVID BROWN [Tue Jul 09, 2013 9:02 pm ] | ||
| Post subject: | Re: LOCATION OF VSS BUFFER BOX | ||
Hooray, i found it. Mine is white. The next step is to check if there is a signal into and out of this unit.
|
|||
| Author: | DAVID BROWN [Thu Jul 11, 2013 11:06 pm ] |
| Post subject: | Re: LOCATION OF VSS BUFFER BOX **UPDATE** |
Just a quick update, We have an AC pulse to the Buffer unit from the new sensor in the gearbox. We also have a output from the unit, but still no speedo, so the next step is to get the guage cluster out. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|