hi,there is a bleed screw on the top of the slave cylinder ,see pic hope this helps
| Attachments: |
| slave cylinder.jpg [577.19KiB |Viewed 672 times ] |
| The Camaro Club (UK) http://classiccamaroclub.mfatw.com/ |
|
| hydraulic clutch bleeding. http://classiccamaroclub.mfatw.com/viewtopic.php?f=5&t=2242 |
Page 1 of 1 |
| Author: | ajsaunders [Tue Apr 10, 2012 1:44 pm ] |
| Post subject: | hydraulic clutch bleeding. |
Hi Just a line to see if anyone can help ! On a 5 litre manual i recently noticed the brake and clutch fluid were quite black and didnt look like they had been changed for ages. With the brakes i syringed the master cylinder empty of old stuff filled with new and bled through on each wheel (luckily all the nipples moved). The cluch however isnt so easy. I removed the slave and heat shield (be carefull the heat shield dosent fall on your face cos its heavy) but no bleed nipple ??? Regards Alan |
|
| Author: | camaro85iroc [Tue Apr 10, 2012 2:49 pm ] | ||
| Post subject: | Re: hydraulic clutch bleeding. | ||
hi,there is a bleed screw on the top of the slave cylinder ,see pic hope this helps
|
|||
| Author: | ajsaunders [Tue Apr 10, 2012 9:00 pm ] |
| Post subject: | Re: hydraulic clutch bleeding. |
Thank you ! Solves a little mystery and next dry weekend i will attempt to bleed it through. It dosent look that easy to get at unless i take the slave off again (maybe that bits made in japan) Cheers Alan |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|