The Camaro Club (UK)

Online Community for all Camaro Owners and enthusiasts
It is currently Mon Nov 25, 2024 5:06 pm

All times are UTC




Post new topic Reply to topic  [13 posts ]  Go to page12Next
Author Message
 Post subject: 1970-1973 Body Shell
PostPosted:Wed Jan 27, 2016 10:51 pm 
Offline
Small Block
User avatar

Joined:Mon May 07, 2012 9:10 pm
Posts:21
Car Details:V6 2010 Camaro 5 1 LT + upgrades UK IVA import
Location:Leeds, UK
... if you have one that isn't eaten alive by rust ... and you can part with it ... please let me know.

I might consider up to a 79 :-)


Last edited by redleader on Fri Jan 29, 2016 12:45 pm, edited 1 time in total.

Top
   

1970-1973 Body Shell

Sponsor

Sponsor
 

 Post subject: Re: 1970-1973 Body Shell
PostPosted:Thu Jan 28, 2016 11:01 am 
Offline
Big Block
User avatar

Joined:Fri Mar 19, 2010 1:35 am
Posts:2566
Car Details:79' camaro road & track day toy. 383 stroker, 5 speed TKO trans, lots of suspension stuff, 13" Vette brakes, 18" wheels.
Location:Luton
I may have a 77' one soon, it will need a fair of work, but is saveable.

_________________
“You only live once, but if you do it right, once is enough.”


Top
   
 Post subject: Re: 1970-1973 Body Shell
PostPosted:Thu Jan 28, 2016 8:08 pm 
Offline
Small Block
User avatar

Joined:Mon May 07, 2012 9:10 pm
Posts:21
Car Details:V6 2010 Camaro 5 1 LT + upgrades UK IVA import
Location:Leeds, UK
cheers chevy stu
let me know w photos if and when
james.


Last edited by redleader on Fri Jan 29, 2016 12:45 pm, edited 1 time in total.

Top
   
 Post subject: Re: 1970-1973 Body Shell
PostPosted:Fri Jan 29, 2016 12:39 pm 
Offline
Big Block

Joined:Mon Mar 09, 2009 12:13 pm
Posts:205
Car Details:1979 Camaro
Just curious, but why only up to 79? What's up with 80/81?


Top
   
 Post subject: Re: 1970-1973 Body Shell
PostPosted:Fri Jan 29, 2016 12:44 pm 
Offline
Small Block
User avatar

Joined:Mon May 07, 2012 9:10 pm
Posts:21
Car Details:V6 2010 Camaro 5 1 LT + upgrades UK IVA import
Location:Leeds, UK
Quote:
Just curious, but why only up to 79? What's up with 80/81?
maybe :-) #limitedknowledge


Top
   
 Post subject: Re: 1970-1973 Body Shell
PostPosted:Sun Mar 27, 2016 10:18 am 
Offline
Small Block
User avatar

Joined:Mon May 07, 2012 9:10 pm
Posts:21
Car Details:V6 2010 Camaro 5 1 LT + upgrades UK IVA import
Location:Leeds, UK
Still looking, any parts considered, even a full body shell ...

_________________
Image
http://www.chevrolet-camaro.co.uk


Top
   
 Post subject: Re: 1970-1973 Body Shell
PostPosted:Sun Mar 27, 2016 11:00 am 
Offline
Big Block
User avatar

Joined:Tue Feb 23, 2010 12:40 pm
Posts:3245
Car Details:'79 Camaro, 350 V8
Location:South Bucks
I think Chevy Stu's has just started to go under the surgeons knife, so could be available in a couple of months. Worst case, bring one over from the states. I know people that part out and crush perfectly good 2nd and 3rd gens, with title, (usually something like engine gone / rusty rails / trans / axle needing rebuild, but everything can be fixed, considering how much effort we put into a rebuild there is genuinely no reason that a car isn't salvageable, maybe if it's been wrapped around a pole would be the exception) they sometimes sell the whole thing for $500-1,000. There are shipping companies that deal with non running cars, it just costs a little extra.

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").


Top
   
 Post subject: Re: 1970-1973 Body Shell
PostPosted:Sun Mar 27, 2016 11:07 am 
Offline
Small Block
User avatar

Joined:Mon May 07, 2012 9:10 pm
Posts:21
Car Details:V6 2010 Camaro 5 1 LT + upgrades UK IVA import
Location:Leeds, UK
cheers Big Block :-)
Such a gamble to import at a distance I feel?
Any links to import chaps welcome.
Will PM Chevy Stu
Cheers...

_________________
Image
http://www.chevrolet-camaro.co.uk


Top
   
 Post subject: Re: 1970-1973 Body Shell
PostPosted:Sun Mar 27, 2016 1:13 pm 
Offline
Big Block
User avatar

Joined:Tue Feb 23, 2010 12:40 pm
Posts:3245
Car Details:'79 Camaro, 350 V8
Location:South Bucks
Very welcome!

I'm trying to remember the names of places that bring stuff in. Hill Shipping i've heard good things about, also John Kulin at Golden Chariots, and also there's STS imports. These companies are all in the UK and what they do is pick the car up from the sellers location via loader, take it to dock, take care of all the paperwork, bring it into southampton, take care of all the import paperwork and fees, and normally deliver it to your door. And the prices aren't too bad, considering how much happens along the way, paperwork is the killer, but they take care of that so you have everything you need to register it. Get the insurance from what i've read as it's not much, but most cars come through just fine so not too much to worry about there. Also don't try and go cheap by not putting it into a container - the guy that installed my windscreen told me of his mate that brought in Mustang that was less than a few years old and went with the cheap option of putting it on the deck. Came in soaking wet and the guy sold it not long after as he knew all of the interior sheet metal would be rotting thanks to the salt water :wtf:

The only tough part is making sure the car is good. But if you're planning on restoring it, then it doesn't really matter too much. Try and get the seller to make a video and send good pics over, to set expectations, assume it will be worse than it looks. I know a guy that bought in a nice '79, was showing me all the pics and it looked mint. Got here and needed panel replacements, so we were both quite shocked as it looked great. Then again, most cars you buy here won't be in good condition and will need work. Check out Flakmonkeys thread - the car looked great and i wasn't sure at first why any work was being done it. Then soon it became apparent, and that car looked clean. So in other words, here or there, you'll end up needing to do some work. It's more of a gamble of course as you're buying sight unseen but you will be paying about half as much, if not even less. One thing i learned was to make sure the pictures are recent and not ones they have from 5, 10 years ago. Try and ask for specific pics that they wouldn't otherwise have taken already. Also make sure it has a clean title. I think Carfax is the equivalent of the HPI check over here, worth doing that. Saw a post the other day on here about a Challenger that was going for a lower price, saying it had some front damage. Carfax showed it was a write off due to flooding. So obviously someone over there knew they're worth a lot over here, whereas it would be scrapped over there, knowing that someone here wouldn't know the history and pay the going rate.

Incidentally, i just saw this - 1970, £5.5k plus $1,750 for him to arrange and ship. Worth getting a quote from the above UK ones as i don't know if this guy would do all the paperwork at import etc. It may just land in Southampton then you have to go down, do the paperwork, pay the fee's, wait for it to clear (takes a few days/ weeks), then come back down with a trailer, or get someone with a trailer - which must be a proper loader, not a converted transit, as people have been stopped leaving the docks and told the loading vehicle is carrying over it's load.

I haven't read much more than skim read of the ad, so worth checking it out in depth. Looks like he's a car dealer, so could be a good sign, maybe better than dealing with someone privately. If it's been a San Diego car all its life, then it's probably genuinely only got a bit of rust. Find out the history, with a vinyl roof if it has lived in the rust belt, could be bad. Overall though, looks original and unmessed with.

http://www.ebay.co.uk/itm/1970-Chevy-Ca ... 1927637800

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").


Top
   
 Post subject: Re: 1970-1973 Body Shell
PostPosted:Sun Mar 27, 2016 3:02 pm 
Offline
Small Block
User avatar

Joined:Mon May 07, 2012 9:10 pm
Posts:21
Car Details:V6 2010 Camaro 5 1 LT + upgrades UK IVA import
Location:Leeds, UK
Thanks again :-)
For all that advice. and time to write it up.
I'd have never found those companies.

Im leaning towards Classic Industires parts, just because it's a 'known' quantity?
Though the shipping is mega high, and alternative carriers ... suspect.

I guess soon as I get a face-to-face relationship with a carrier I be less nervous.

Cheers,

James R

_________________
Image
http://www.chevrolet-camaro.co.uk


Top
   
Display posts from previous: Sort by 
Post new topic Reply to topic  [13 posts ]  Go to page12Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited