The Camaro Club (UK)

Online Community for all Camaro Owners and enthusiasts
It is currently Fri Nov 22, 2024 10:19 am

All times are UTC




Post new topic Reply to topic  [5 posts ] 
Author Message
 Post subject: Brake bleeding issue
PostPosted:Tue Apr 02, 2019 9:16 am 
Offline
Small Block

Joined:Thu Feb 07, 2019 12:28 pm
Posts:28
Car Details:N/A - ATM
Hey, can any one help?
I have a 69 Camaro with a Summit Racing rear diff / disc brake set up.
We've adjusted the hand brake and fitted new pads but just can not bleed the brakes.
Any one got any ideas?
Two of us have been bleeding the system for ages and the pedal still goes straight to the floor.

HELP!

Thank you.


Top
   

Brake bleeding issue

Sponsor

Sponsor
 

 Post subject: Re: Brake bleeding issue
PostPosted:Tue Apr 02, 2019 1:26 pm 
Offline
Big Block

Joined:Mon Mar 09, 2009 12:13 pm
Posts:205
Car Details:1979 Camaro
Assuming there's not a growing puddle of fluid appearing on the floor, it sounds like you have a lot of air in it.

Have you bench bled the master cylinder?

After that, try gravity bleeding till some fluid appears, then go back to pump bleeding.


Top
   
 Post subject: Re: Brake bleeding issue
PostPosted:Mon Jul 01, 2019 2:12 pm 
Offline
Small Block

Joined:Mon Jul 01, 2019 2:00 pm
Posts:3
Car Details:67 rs/ss 396 convertible, white, bright blue interior, owned 34 years
factory built indy 500 replica.
Hi
do you have a dual master cylinder , circuit for front & circuit for rears ? hold off valve ?

if you do you definately need to do a bench bleed, I rehoned , & overhaul my dual delco on my 67 big block & it took nearly 1 hour to bleed off the car for the rears ( drums) .
if its on the car get some rags around the master cylinder , one pump the pedal slowly & the other watch for any bubbles /fountain in the rear resevoir ( obviously usal precautions safety goggles 8-) ).


Top
   
 Post subject: Re: Brake bleeding issue
PostPosted:Tue Jul 02, 2019 12:11 pm 
Offline
Small Block

Joined:Thu Feb 07, 2019 12:28 pm
Posts:28
Car Details:N/A - ATM
Thanks for the tip.
Still fighting with the brakes on this car.
They just don't want to work.

Fingers crossed for progress this week.


Top
   
 Post subject: Re: Brake bleeding issue
PostPosted:Tue Jul 09, 2019 8:47 am 
Offline
Small Block

Joined:Mon Jul 01, 2019 2:00 pm
Posts:3
Car Details:67 rs/ss 396 convertible, white, bright blue interior, owned 34 years
factory built indy 500 replica.
Hi
also I've remembered do you have the BIG block valve under the drivers side on the chassis rail, could be worth checking that.
btw is it the original dual master cylinder ? did you rebuild it or aftermarket one ? is the brake push rod from the pedal in place/correct length ?

don't want to teach you to suck eggs, have you broken the system down in parts ? (messy I know), can you get fluid to the union at the rear axle, then to the union before the caliper pipe,etc etc


Top
   
Display posts from previous: Sort by 
Post new topic Reply to topic  [5 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 21 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited