The Camaro Club (UK)

These are a few years ago now,but please feel free to ask any questions,i will attempt to answer as best i can !,Bry

Few more

Few more

WOW!! Thanks for posting those up Bry, that sure was a lot of work & it turned out really well . I take it you did it yourself? What sort of numbers did the Dyno show? What sort of spec is the engine? I really like that car a lot, do you get to use it much nowadays seeing as your "collection" is growing cheers....Nige

_________________
Too much power...not enough hands!!

Hi Nige, there not very good, pictures of pictures,i dont have a scanner,not quite all my own work,Kenny Coleman of EDA,built and dyno'd the motor,we wanted it to be as near to origonal as poss,and we wern't far out it made 348hp,which with the overbore,and bit of a cam.just upted it from the 325hp it set off with,i was very busy around this time so i let Dave Billadeau (mopar guy !) fit the motor,the autobox was done by
Martin Lowe transmisions,In Barnsley,As for use -i am using it as my daily at the mo !!And this evening im setting off for Hertfordshire for the Outlaws Picnic.After that it'll be probably back in the garage for a while
Bry

Hi Bry, thanks for those pics, ya got any more of it finished?? cheers....Nige

_________________
Too much power...not enough hands!!

This is one of Ian Shipley's teh photographer from the C/A shoot,i am having a mare loading his pic's !-but they are the only ones i have ,! Bry

another

I think Kenny Coleman does Tim Boles engine on "Butch", he raves about his work.

_________________
Steven
Webmaster
83 Chevy G-20 A-Team Van 305/700R4

Guys,Ken's knowledge and experiance in engine building and dyno work is reconised world wide,i cannot his work recommened highly enough,The 8 sec motor in my Nova has had nothing apart from oil changes in three years ! (and the block is 40 years old !)

EDA -Ken Coleman-01977 516622