The Camaro Club (UK)

Online Community for all Camaro Owners and enthusiasts
It is currently Fri Nov 01, 2024 7:20 am

All times are UTC




Post new topic Reply to topic  [22 posts ]  Go to page123Next
Author Message
PostPosted:Sat Oct 19, 2013 11:30 pm 
Offline
Big Block

Joined:Thu Oct 17, 2013 7:36 pm
Posts:81
Car Details:1969 Chevrolet Camaro
Hey, I've got a few problems I need to sort, they are

1. door and rear quarter glass needs adjusted as there are gaps between the seals and needs aligned
2. problem with wipers- fast speed works fine but on slow they sometimes jam and when the stop they stop half way up the screen
3. high beam light on dash not working


The windows probably just need to mess with the bolts to line them up, the other ones any ideas on what to check for the wipers?


Top
   

help fixing a few problems

Sponsor

Sponsor
 

PostPosted:Sun Oct 20, 2013 8:18 am 
Offline
Big Block
User avatar

Joined:Wed Aug 01, 2012 10:49 pm
Posts:500
Car Details:a car thats older than the c*** that drives it....
Location:n london/ herts
my high beams were just the switch...does it click when pressed in/out


Top
   
PostPosted:Sun Oct 20, 2013 9:18 am 
Offline
Big Block

Joined:Thu Oct 17, 2013 7:36 pm
Posts:81
Car Details:1969 Chevrolet Camaro
Yeah the high beams work when I press the switch on the floor, just the light on the dash dosent work, hopefully its just a bulb,


Top
   
PostPosted:Sun Oct 20, 2013 9:29 am 
Offline
Big Block

Joined:Thu Oct 17, 2013 7:36 pm
Posts:81
Car Details:1969 Chevrolet Camaro
Also when I'm turning the front tyres scrub on the outside of the tyres, I'd that because its low or is that the wheel geometry out?


Top
   
PostPosted:Mon Oct 21, 2013 9:14 am 
Offline
Big Block

Joined:Sun Jun 02, 2013 7:20 pm
Posts:160
Car Details:80 T/A with a BBC
79 Z28
68 Firebird F 400
67 Firebird Convertible
Location:Penzance, Cornwall
Probably because its low,but what size are the tyres and which wheels have you got? I've put some spring spacers in mine because it did the same thing, primitive but it works, the light is probably the bulb, the windows are adjustable but mark them first as you may make things worse and when you make an justment either close the door with the window down a little or close it gently because the glass may hit the body work :thumbdown:


Top
   
PostPosted:Mon Oct 21, 2013 9:21 am 
Offline
Big Block

Joined:Sun Jun 02, 2013 7:20 pm
Posts:160
Car Details:80 T/A with a BBC
79 Z28
68 Firebird F 400
67 Firebird Convertible
Location:Penzance, Cornwall
wipers may be the motor is getting worn out or the posts that the arms mount on are seized and making it to tight to move.

or the switch or connections may be dirty, may get warm when working which will tell you if the switch/connection is at fault


Top
   
PostPosted:Mon Oct 21, 2013 12:58 pm 
Offline
Big Block

Joined:Thu Oct 17, 2013 7:36 pm
Posts:81
Car Details:1969 Chevrolet Camaro
Sorted the light it was just a loose bulb, the front wheels are american racing torque thrust 2, tyre size 215/40/17, it loos like the drivers side has more wear than the other, it has qa1 shocks.

The wipers are weird, fast speed works fine but on slow they stop and sometimes when I go to turn them off they keep going :s


Top
   
PostPosted:Mon Oct 21, 2013 2:19 pm 
Offline
Big Block
User avatar

Joined:Fri Mar 19, 2010 1:35 am
Posts:2566
Car Details:79' camaro road & track day toy. 383 stroker, 5 speed TKO trans, lots of suspension stuff, 13" Vette brakes, 18" wheels.
Location:Luton
Quote:
The wipers are weird, fast speed works fine but on slow they stop and sometimes when I go to turn them off they keep going :s
Sounds like dodgy switch/connections....

_________________
“You only live once, but if you do it right, once is enough.”


Top
   
PostPosted:Mon Oct 21, 2013 2:31 pm 
Offline
Big Block
User avatar

Joined:Tue Feb 23, 2010 12:40 pm
Posts:3245
Car Details:'79 Camaro, 350 V8
Location:South Bucks
Quote:
p3te wrote:
The wipers are weird, fast speed works fine but on slow they stop and sometimes when I go to turn them off they keep going :s

Sounds like dodgy switch/connections....
Yep - i have the same with mine. A gentle touch will give you any combination of slow/ fast / delay depending on what mood it's in. It's a dodgy switch box. If you take it apart, it's a slide switch with multiple contacts that are flexible. If you imagine that all the contacts on the slider are the same as the contact plate underneath, it's just a gap separating them, the contact plate is able to make contact because at certain points the contact point is bent upwards. Hope that makes sense :think: The contacts on mine were pushed quite far in so the switch wasn't making contact, so thought it was a bad motor, which i then replaced, still didn't work. So i took the switch apart and rebent the contacts so they stuck out further. Now everything was working, all the time. I then took it apart again and debent them a bit and it's at a sort of happy medium now. Triggers way too easily but at least the operations are correct based on the markings on the switch.

_________________
How to post pics: When writing a message, scroll down and use the "attach file" option. Where possible, a photo sharing service can be used such as Flickr, Imgur etc. The image location (usually ending in .jpg) can be copy and pasted between the ][ brackets that appear when you click the 'Img' button (you can find this button at the top of the message box).

How to post youtube vids: Click on the 'youtubeHD' button at the top of the message box and in the middle of the ][ brackets that just appeared, copy and paste everything from the youtube web address that appears after the = sign i.e if this is the url: https://www.youtube.com/watch?v=K2cNqaPSHv0 just copy "K2cNqaPSHv0").


Top
   
PostPosted:Mon Oct 21, 2013 5:56 pm 
Offline
Big Block

Joined:Thu Oct 17, 2013 7:36 pm
Posts:81
Car Details:1969 Chevrolet Camaro
Quote:
Quote:
p3te wrote:
The wipers are weird, fast speed works fine but on slow they stop and sometimes when I go to turn them off they keep going :s

Sounds like dodgy switch/connections....
Yep - i have the same with mine. A gentle touch will give you any combination of slow/ fast / delay depending on what mood it's in. It's a dodgy switch box. If you take it apart, it's a slide switch with multiple contacts that are flexible. If you imagine that all the contacts on the slider are the same as the contact plate underneath, it's just a gap separating them, the contact plate is able to make contact because at certain points the contact point is bent upwards. Hope that makes sense :think: The contacts on mine were pushed quite far in so the switch wasn't making contact, so thought it was a bad motor, which i then replaced, still didn't work. So i took the switch apart and rebent the contacts so they stuck out further. Now everything was working, all the time. I then took it apart again and debent them a bit and it's at a sort of happy medium now. Triggers way too easily but at least the operations are correct based on the markings on the switch.
Ah nice one, ill take the switch out and have a mess about when I have time, easy fix hopefully


Top
   
Display posts from previous: Sort by 
Post new topic Reply to topic  [22 posts ]  Go to page123Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 105 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited