Hi Steve
this is the one i have and used it for years works spot on http://www.ebay.co.uk/itm/450711A-Heavy ... 3620548%26 Hope this works ,Cheers Neil. You can use it and not damage joints if you are carefull . 
| The Camaro Club (UK) http://classiccamaroclub.mfatw.com/ |
|
| ball joint separators http://classiccamaroclub.mfatw.com/viewtopic.php?f=3&t=3386 |
Page 1 of 1 |
| Author: | farl cogetty [Thu Sep 05, 2013 9:51 pm ] |
| Post subject: | ball joint separators |
all ways beaten them off with a hammer on the landy but feel I need a softer touch on the Poncho ....so which is best for removing the steering knuckle ????? http://www.ebay.co.uk/itm/Draper-63770- ... 20d4cfb365 http://www.ebay.co.uk/itm/450712-Heavy- ... 3f23cda9c4 or any other you can recommend..... |
|
| Author: | neil.w [Thu Sep 05, 2013 11:07 pm ] |
| Post subject: | Re: ball joint separators |
Hi Steve this is the one i have and used it for years works spot on http://www.ebay.co.uk/itm/450711A-Heavy ... 3620548%26 Hope this works ,Cheers Neil. You can use it and not damage joints if you are carefull .
|
|
| Author: | farl cogetty [Fri Sep 06, 2013 6:23 am ] |
| Post subject: | Re: ball joint separators |
cheers Neil.... hows the tot rod going ??? I still aint had time too do the springs and control arm bushes .....its work work work all the time 
|
|
| Author: | neil.w [Fri Sep 06, 2013 10:37 pm ] |
| Post subject: | Re: ball joint separators |
No problem Steve been a bit busy my self ,the thing about working your nuts off  is that you have more money to spend on the poncho  starting back on the totrod shortly (it should be a nice chrimbo pressie )if that pesky work dosen,t get in the way .And the weather is turning cxxp so a few extra days in the garage Cheers Mate Neil
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|