The Camaro Club (UK) http://classiccamaroclub.mfatw.com/ |
|
biggest tyres http://classiccamaroclub.mfatw.com/viewtopic.php?f=3&t=2445 |
Page 1 of 1 |
Author: | farl cogetty [Wed Aug 15, 2012 10:25 pm ] |
Post subject: | biggest tyres |
Im after either a 1st gen camaro or firebird to semi pro tour..what are the biggest rear tyres on 17"rims you can get on a 69 w/out modification? also to lower the front do you have to use drop spindles and would stiffer springs be needed? p.s anyone has a car for sale(not pristine but half tidy) |
Author: | evilzee28 [Thu Aug 16, 2012 6:56 am ] |
Post subject: | Re: biggest tyres |
Quote: Im after either a 1st gen camaro or firebird to semi pro tour..what are the biggest rear tyres on 17"rims you can get on a 69 w/out modification? also to lower the front do you have to use drop spindles and would stiffer springs be needed? p.s anyone has a car for sale(not pristine but half tidy)
Hi & welcome to the forum The largest 17" wheel & tyre combo to fit a '69 Camaro is:-17x8 front wheel with a back spacing of 4&7/8" or 5" maximum 245/40/17 tyre 17x9.5 rear wheel with a back spacing of 5.5" 275/40/17 tyre This is only a close guide though, as there are things that can make a difference such as ride height/possible arch repairs etc making the body different to manufacturers spec. You have to remember though that the 67-68 Camaros have different arches to the '69. As to dropping the front, yes you can use dropped spindles, that'll only lower it a small amount, or alternatively, have the stiffer springs made to the height you want them to be. hth cheers...Nige |
Author: | mark68 [Thu Aug 16, 2012 12:58 pm ] |
Post subject: | Re: biggest tyres |
When looking to go the drop spindle route, have a read of this: http://www.pro-touring.com/showthread.p ... p+spindles |
Author: | farl cogetty [Thu Aug 16, 2012 6:38 pm ] |
Post subject: | Re: biggest tyres |
cheers !!! the rears are bigger than i thought so now i just need the car |
Page 1 of 1 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |