The Camaro Club (UK)
http://classiccamaroclub.mfatw.com/

2nd Gen Camaro Parts - Plus Pontiac GTA Alloy Wheels
http://classiccamaroclub.mfatw.com/viewtopic.php?f=15&t=5211		 Page 1 of 2
Author:  jon_buss [Sun Mar 12, 2017 1:34 pm ]
Post subject:  2nd Gen Camaro Parts - Plus Pontiac GTA Alloy Wheels
I've just listed some parts on ebay, and have been advertising on Facebook, but hadn't put anything up here!

I have the following for sale:

2nd Gen Camaro / Firebird plastic seat backs - 1971-1977. In Camel Tan, excellent refurbished condition
2nd Gen Camaro / Firebird Sun Visors - in repainted black. In good condition (one seam split, but stapled together before being painted, doens't look too bad!)
2nd Gen Camaro Sail Panels - In Camel Tan with top black stripe (as I have a black headlining). Could do with a repaint, but in excellent condition
2nd Gen Camaro Dash and Bezel - Base dash (dummy lights, no rev counter) and bezel (black with painted alloy rims). In OK condition. Dash has two tabs missing, speedo pointer has been repaired, bezel has one corner missing. But useful for spares or for a 'daily' Has wiper switch and california emissions light, from 1980 model with 85 mph speedo
Front top grill, from berlinetta but been painted black.
A/C radiator
Original fan, clutch and shroud.
Half the A/C box with some parts still in it (small radiator thing)
Window washer bottle
Radiator header bottle (one tab missing), with cap. HD radiator top panel and supports
Used alternator, Power Steering Pump, some original pulleys
A set of MSD SBC HEI HT leads, not been used for too long (a couple of months)
An Edelbrock pan airfilter (top cover has been painted in Chevy Bronze)
Original front driving lights (non chrome bar version) in good condition, but with some slight crazing in the corner of the lenses

Think that's it. Give me a shout for prices / photos. Or have a look on eBay or Facebook. PM me or email jon_buss@hotmail.com

I am in Devon, so either buyer collects or it will need posting. Or, I can bring to Wheels Day in Aldershot next month

Cheers

Jon
Author:  78 Camaro [Sun Mar 12, 2017 9:12 pm ]
Post subject:  Re: 2nd Gen Camaro Parts - Plus Pontiac GTA Alloy Wheels
Could be interested in the shroud if it's the right fit and price. Would you mind measuring and if you have any pics that would be great too. Cheers!
Author:  jon_buss [Tue Mar 14, 2017 3:09 pm ]
Post subject:  Re: 2nd Gen Camaro Parts - Plus Pontiac GTA Alloy Wheels
Will do, I'll measure / take piccies tonight.

I know it's the factory HD / V8 California radiator so is the larger one of the two offered.

I'll try and put up details later, but it may not be till tomorrow as I'm at work late today......

Cheers!

PS - Info for others, the dash has now sold. Everything else still available!!!
Author:  chevy-stu [Tue Mar 14, 2017 6:46 pm ]
Post subject:  Re: 2nd Gen Camaro Parts - Plus Pontiac GTA Alloy Wheels
Think FlakMonkey wanted a rad header bottle, that was a while back though
Author:  jon_buss [Tue Mar 14, 2017 8:41 pm ]
Post subject:  Re: 2nd Gen Camaro Parts - Plus Pontiac GTA Alloy Wheels
I've attached two pictures of the shroud, hope it works OK!!

Measuring it the width is 70cm, the height is 49cm (though this is the rectangle / rad size, there is a radius which goes higher than this)

It's in good condition, bar needing a bit of a clean.

Thinking of £15 for it, if it suits. Just not sure the best way to post it to be honest! Could be pricey due to the size, PM me if you want more info / postage quote. Can bring it to Wheels day in Surrey in April, if you're going?

I do have the header tank as well if Flakmonkey is interested, will send a PM!

Attachments:
IMG_2302.JPG
IMG_2302.JPG [26.88KiB |Viewed 1314 times ]
IMG_2301.JPG
IMG_2301.JPG [28.8KiB |Viewed 1314 times ]
Author:  78 Camaro [Wed Mar 15, 2017 10:42 am ]
Post subject:  Re: 2nd Gen Camaro Parts - Plus Pontiac GTA Alloy Wheels
That was faster than expected :thumbup: Thanks for taking the time -will measure up my rad today. It has a large rad in there, so likely the big California one that you mentioned. Sorry for the extra question but if it's possible, do you know what size the fan hole is? I plan to use the existing electric fan which is 16", but happy to modify / make a bracket.

Ye good thinking on postage - i likely won't be going to wheels day BUT it is near(ish) to me so i could always meet you before / after nearby if that would work?

Thanks again!
Author:  78 Camaro [Wed Mar 15, 2017 6:12 pm ]
Post subject:  Re: 2nd Gen Camaro Parts - Plus Pontiac GTA Alloy Wheels
All measured up and yep that's the same measurements, i'll take it :D :thumbup:

We can work out logistics, likely wheels days would be best. Guessing you are coming up the M3? Could meet you off of Junction 5 before / after the event (traffic locally will be bad). Let me know how that would sound and if you have any better ideas :) Cheers!
Author:  jon_buss [Wed Mar 15, 2017 9:44 pm ]
Post subject:  Re: 2nd Gen Camaro Parts - Plus Pontiac GTA Alloy Wheels
Cool! Have measured the fan hole at 19" for what it's worth!

I'm coming up the A303 the night before and staying in Fleet. Seem to remember J5 is Hook, used to work there (at Racal, in Barcley Business Park) many moons ago! Can meet you there the night before if it helps, or like you suggest before / after Wheels. I'm actually in it, so will be in the Camaro (unless the weather is pants, in which case I'll be in the daily!)

Will PM you with my email and mobile details. All yours, and we'll sort out exact times / place nearer the time if that works for you!

Cheers

Jon
Author:  78 Camaro [Thu Mar 16, 2017 4:56 pm ]
Post subject:  Re: 2nd Gen Camaro Parts - Plus Pontiac GTA Alloy Wheels
That's brill thanks! I was expecting some level of modification would be needed to fit the electric fan, so that should be close enough to be able to fabricate some brackets around.

Cheers for the PM, just replied, sound good for meeting the night before, happy to work around your logistics as i have no plans for that evening.

Thanks! :thumbup:
Author:  NickGifford [Sat Mar 25, 2017 10:10 am ]
Post subject:  Re: 2nd Gen Camaro Parts - Plus Pontiac GTA Alloy Wheels
Hi Jon
Is everything sold?
I would be interested in the radiator if it's the 3 row 26" piece, and also the fan if you still have them

Nick
Page 1 of 2 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/