The Camaro Club (UK) http://classiccamaroclub.mfatw.com/ |
|
2nd gen bits for sale http://classiccamaroclub.mfatw.com/viewtopic.php?f=15&t=5061 |
Page 1 of 2 |
Author: | 78 Camaro [Mon Sep 26, 2016 12:58 am ] |
Post subject: | 2nd gen bits for sale |
Mostly from my '79, almost done rummaging through boxes so will add few more bits this week. Here's the bits so far that are up for sale (pics will be added) : 1x Gauge cluster (has idiot lights) £5 + postage OBO 1x Dash gauge bevel cover £10 + postage OBO 2x bullet wing mirrors, has the slightly larger mirrors, both in red. Paid £20 at a swap meet, happy to take £10 + postage OBO 1x Centre trunk lid Spoiler (has a fibreglassed base, so the bolt holes on the sides match the original locations, but the middle ones are in a different spot, so would require the middle bit to have new holes drilled in the trunk lid) £10 + postage OBO 1x centre console for an automatic (no glove box) in green, pretty good condition though will need a clean and likely will need to be painted to match anyways. These go for around £75 usually, asking £40 + postage (collection may be cheaper) OBO 2x Manual gearboxes (sold separately or deal for both), both in need of repair. Will get model numbers, believe one is a saginaw. 1 has a shifter and linkage. Was going to rebuild them as a hobby project but no chance of that happening any time soon. £60 each OBO pick up needed as they are heavy, from Junction 7 area of M4 / Junction 2 area of M40. 1x Starter motor that i believe is for a Chevy Truck, came off a manual so will works on auto's too, even though it's for a truck from what i've read that nose can be changed. Bought it for £40 but would take £20 OBO Slideshow of pics: |
Author: | 78 Camaro [Sun Oct 30, 2016 12:22 pm ] |
Post subject: | Re: 2nd gen bits for sale |
Added some pics to this album. First batch of pics are for the console. Open to offers on all items listed. http://s1357.photobucket.com/user/79cam ... For%20Sale |
Author: | 78 Camaro [Wed Nov 16, 2016 10:34 pm ] |
Post subject: | Re: 2nd gen bits for sale |
Finally took some pics, just need to get around to uploading them. 1 of the gearboxes is spoken for, the other is a Saginaw 3 speed manual box. Rebuild kits are about $69 when i had a quick look, comes with all the bearings, dog rings etc. |
Author: | chevy-stu [Thu Nov 17, 2016 8:07 am ] |
Post subject: | Re: 2nd gen bits for sale |
Is the gauge cluster with rev counter and decent speedo ?.. mines only got fuel and speed. |
Author: | Jamieg285 [Thu Nov 17, 2016 12:17 pm ] |
Post subject: | Re: 2nd gen bits for sale |
Quote: Is the gauge cluster with rev counter and decent speedo ?.. mines only got fuel and speed.
If it's not what you are looking for, I've recently acquired a cluster that came free with a bezel I bought. I've not even unpacked it yet, so don't know what it is yet, but can take a look if you want.
|
Author: | 78 Camaro [Mon Nov 21, 2016 10:49 am ] |
Post subject: | Re: 2nd gen bits for sale |
Sorry, i didn't see this earlier. It is the one with idiot lights, so probably the same as the one in there already, guess i may have to bin it as don't think it would have much use to anyone. Probably the one JamieG has will be better as that have may the rev counter? |
Author: | chevy-stu [Mon Nov 21, 2016 10:08 pm ] |
Post subject: | Re: 2nd gen bits for sale |
Quote: Sorry, i didn't see this earlier. It is the one with idiot lights, so probably the same as the one in there already, guess i may have to bin it as don't think it would have much use to anyone. Probably the one JamieG has will be better as that have may the rev counter?
One in three now has big clock centre right, 130mph speedo centre left warning lights on left..I'll check his out .. |
Author: | Jamieg285 [Thu Nov 24, 2016 1:28 pm ] |
Post subject: | Re: 2nd gen bits for sale |
I've opened up the box to see what I've got. It's a kph speedo, but is the full set of guages. Lenses look OK. One of the mounting tabs is broken, another (opposite corner) is cracked. The wiring circuit bends up in the corners, but appears to be intact(these bits are for the lighting circuit) I've never seen one, but it looks like there should be a knob on the end of the clock adjuster. No idea how functional it is, and don't have any way of testing it either (swapping to Autometer guages was one of the first things I did in my car). |
Author: | 78 Camaro [Thu Nov 24, 2016 6:34 pm ] |
Post subject: | Re: 2nd gen bits for sale |
That'll be the one that Stu's after! I have a MPH gauge on mine with the idiot lights, maybe he can add that gauge to yours and get the set full set with MPH. |
Author: | chevy-stu [Sat Nov 26, 2016 4:11 pm ] |
Post subject: | Re: 2nd gen bits for sale |
I'm popping to Autopontiac next week, so will see what he's got. It would be alot easier to just do a straight swap with a rev counter/mph cluster, as it needs a new speedo cable anyway... Flak Monkey fitted new oil pressure and temp gauges as it had spaces for after market ones, so only really needs tach. |
Page 1 of 2 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |