| The Camaro Club (UK) http://classiccamaroclub.mfatw.com/ |
|
| 1982-92 aftermarket headers wanted http://classiccamaroclub.mfatw.com/viewtopic.php?f=15&t=4980 |
Page 1 of 1 |
| Author: | Fiero [Mon Jun 06, 2016 9:40 pm ] |
| Post subject: | 1982-92 aftermarket headers wanted |
After some aftermarket/decent exhaust manifolds/ headers for a 305/350 5 Speed manual 1990 Camaro. |
|
| Author: | 3rdGenmalc [Tue Jun 07, 2016 6:48 am ] |
| Post subject: | Re: 1982-92 aftermarket headers wanted |
The first headers I bought were Edelbrock, with the air tube fittings, they just were´nt a decent gauge and got holes in them. Now I have Hedman headers and Y pipe, not too expensive either. http://www.summitracing.com/int/parts/h ... /overview/ http://www.summitracing.com/int/parts/h ... /overview/ 
|
|
| Author: | Fiero [Tue Jun 07, 2016 8:14 am ] |
| Post subject: | Re: 1982-92 aftermarket headers wanted |
I've got those in now and there terrible, good to start with but the way-pipe is terrible fitment and there already rotting through. |
|
| Author: | 3rdGenmalc [Tue Jun 07, 2016 10:39 am ] |
| Post subject: | Re: 1982-92 aftermarket headers wanted |
You have to admit the Y pipe is in a nasty place, gets all the stones off the front wheel. I´m more than content with mine, they do need painting again but there are no signs of rust. Is your Y pipe rusting from the inside out, maybe it´s condensation from the motor ? |
|
| Author: | 3rdGenmalc [Tue Jun 07, 2016 11:27 am ] |
| Post subject: | Re: 1982-92 aftermarket headers wanted |
Possible header choices. http://www.summitracing.com/int/search/ ... cation=int I think most of these will require you to fabricate a means to connect to your existing exhaust. |
|
| Author: | Fiero [Tue Jun 07, 2016 12:51 pm ] |
| Post subject: | Re: 1982-92 aftermarket headers wanted |
Outside in, I'm a fan of stainless steel. Had it on my Capri and supra and never had a problem. Car has no exhaust as it has to have a custom made one due to the lpg tank fitted. So don't care for a y pipe as such. Will have a proper look through it tonight, Cheers. If anyone in the uk has some decent ones let me know folks! |
|
| Author: | 3rdGenmalc [Tue Jun 07, 2016 3:24 pm ] |
| Post subject: | Re: 1982-92 aftermarket headers wanted |
I´d like stainless or ceramic coated but that is all quite expensive. |
|
| Author: | 3rdGenmalc [Tue Jun 07, 2016 4:01 pm ] |
| Post subject: | Re: 1982-92 aftermarket headers wanted |
Maybe you should ask over at....http://www.rodsnsods.co.uk/forum/ |
|
| Author: | Fiero [Wed Jun 08, 2016 8:17 am ] |
| Post subject: | Re: 1982-92 aftermarket headers wanted |
Just asked a couple of companies in the UK and will keep looking. Cheers 3rdgenmalc |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|