The Camaro Club (UK)
http://classiccamaroclub.mfatw.com/

3.76;1 rear axle, rear pan's, chassis leg's,etc.
http://classiccamaroclub.mfatw.com/viewtopic.php?f=15&t=3189		 Page 1 of 2
Author:  Pa's F-bodies [Sat Jun 22, 2013 5:02 pm ]
Post subject:  3.76;1 rear axle, rear pan's, chassis leg's,etc.
I've just taken off a 3.76 to 1 LSD rear axle it was fitted to my 67 Firebird but its originally a second gen axle with the perches moved in a little to make it fit. £300

I have 2 new rear pans that are the ones from under the seat, they were bought for a 77 second gen T/A but I dont think theres much difference. some surface rust because they have been sat around for a while £40 the pair.

Also a pair of new rear chassis legs also for a 77 T/A but I don't think these much difference. Some surface rust because they have been sat around. £175 the pair.

I've got a couple of sbc 350 motors both complete one striped down 2 years ago but never got around to building it I have some new parts (1975 Lt motor) the other is a truck motor but I don't think its a 4 bolt, I was told it had been rebuilt when I bought it but its been here 3 years so I'd have a quick look inside before fitting it if you buy it. £350 and £450

I have a shed full of other stuff also like old carbs, starters, altenatators, trunk lid's, window trim, etc so if you need something just ask you never know I may have it here somewhere, many years of accumulation of G.M parts :)
Author:  chevy-stu [Sun Jun 23, 2013 12:33 am ]
Post subject:  Re: 3.76;1 rear axle, rear pan's, chassis leg's,etc.
Flak monkey was looking for a 3:xx LSD rear complete.

Might be worth messaging him.
Author:  78 Camaro [Sun Jun 23, 2013 12:43 pm ]
Post subject:  Re: 3.76;1 rear axle, rear pan's, chassis leg's,etc.
I think that Andy Camaro was after a trunk lid.

Do you by any chance have a delay wiper switch kicking about?

Cheers!

Ray
Author:  Pa's F-bodies [Sun Jun 23, 2013 1:14 pm ]
Post subject:  Re: 3.76;1 rear axle, rear pan's, chassis leg's,etc.
OK thanks, and I'll have a look for the delay wiper switch, I think I've got one some where from a 78 or 75 that I broke for parts a couple of years ago.
Author:  chevy-stu [Sun Jun 23, 2013 2:27 pm ]
Post subject:  Re: 3.76;1 rear axle, rear pan's, chassis leg's,etc.
Got any lightweight fibreglass bits ?
Author:  Pa's F-bodies [Sun Jun 23, 2013 3:26 pm ]
Post subject:  Re: 3.76;1 rear axle, rear pan's, chassis leg's,etc.
No sorry I don't have anything like that, no racers or tracks down here :thumbdown:
Author:  Rocky [Sun Jun 23, 2013 9:05 pm ]
Post subject:  Re: 3.76;1 rear axle, rear pan's, chassis leg's,etc.
How much for trunk lids have you got a few?
Author:  Pa's F-bodies [Tue Jun 25, 2013 8:38 am ]
Post subject:  Re: 3.76;1 rear axle, rear pan's, chassis leg's,etc.
Trunk lids, I have a couple left but I'll look at them later to see whats left I know there a ruff one there for £25 but I'm not sure how good the other one is.
Author:  Pa's F-bodies [Tue Jun 25, 2013 8:46 am ]
Post subject:  Re: 3.76;1 rear axle, rear pan's, chassis leg's,etc.
Doh sorry ray I forgot to look for your switch, I'll try again later.
Author:  78 Camaro [Tue Jun 25, 2013 1:37 pm ]
Post subject:  Re: 3.76;1 rear axle, rear pan's, chassis leg's,etc.
No worries, i've been working on this thing for 3years, so an extra few days doesn't make any difference lol. Cheers!
Page 1 of 2 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/