| The Camaro Club (UK) http://classiccamaroclub.mfatw.com/ |
|
| 2nd gen brake/upgrade bits... http://classiccamaroclub.mfatw.com/viewtopic.php?f=15&t=1642 |
Page 1 of 1 |
| Author: | chevy-stu [Thu Apr 07, 2011 5:11 pm ] |
| Post subject: | 2nd gen brake/upgrade bits... |
Set of drilled and and slotted EBC brake discs with anodised hubs (so they won't rust) Pair of stock calipers (rebuilt about 4 years ago) Set of EBC Yellowstuff brake Pads These were removed a few months ago from my 1977 Camaro, due to an upgrade to big Corvette brakes. These are the standard sized discs so will fit under the original wheels. Calipers were working perfectly as they had new seals about 10k miles ago, and are complete with good condition slide bolts. The discs are barely worn and have no signs of a lip appearing at all. The pads are a hard semi-competition compound and grip way better than standard and are about 1/3 worn. Only issue is one caliper is missing the hose bolt, not big deal if replacing, as you'll have this anyway. These may fit other 2nd generation (1970 - 1981) Camaro's and Firebird/Trans Ams, I'm not sure which exactly though. The discs and pads would cost about £200 new, so with the calipers too this is gonna be a bargain for someone looking for a good stage 1 brake upgrade to their motor. Ideally collection from NW London. Courier can be arranged at buyers expense but this is a heavy batch of metal so will cost alot to send. Going on ebay tonight too... Looking for £100 the lot... Stu - 07956828968 |
|
| Author: | 78 Camaro [Thu Apr 07, 2011 8:47 pm ] |
| Post subject: | Re: 2nd gen brake/upgrade bits... |
damit this has come too soon!! I am tinkering with the idea matey, just got home. I remember mine feeling like the air resistance was doing most of the work stopping the car  even though the standard brakes are in pretty healthy size. Out of interest, how much better did you find these over stock? and how much is your corvette upgrade costing? cheers!! Ray
|
|
| Author: | chevy-stu [Sat Apr 09, 2011 6:00 pm ] |
| Post subject: | Re: 2nd gen brake/upgrade bits... |
Ebay ad with pics n' stuff here: http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 500wt_1156 I also have a set of 7/16" standard 1st or 2nd gen chrome locking wheel nuts I'm selling on ebay too, Here: http://cgi.ebay.co.uk/Chevy-Pontiac-Cam ... 500wt_1156 |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|