Hi all,
here I have a set of drop spindles and front brake calipers and hoses from a 98 LS1 V8 4th gen camaro. This is all you would need bar rotors and pads to convert any pre 97 LT1 or V6 car to the twin pot LS1 camaro brakes. (these require 16" or large wheels when fitted) These would be a great improvement particularly for the pre 97 LT1 camaro with the small single pot calipers
You would need to remove your own hubs from the spindles and fit them to these.
The drop spindles and caliper surround have had a coat of black paint, the calipers have been stripped and cleaned, the seals are all fine as are the dust boots. They should be ready to bolt on.
Im wanting about £100 for these but open to offers. Will post if needed but will be expensive due to weight. Collection preferred or meet could be arranged
