SBC 355 Built by ICE back in 1990s
No ICEA074 (original build sheets from ICE available)
4 Bolt mains
World Products iron heads (angled plugs)
Edelbrock Performer RPM inlet
Holley 4150 850 double pumper
MSD Distributor
GM starter motor
Edelbrock short water pump
Hamburger oilpan
Moroso valve covers (modified here and there!)
Fresh bearings, seals fitted, not used since
This engine made 307bhp at the wheels, and ran 12.37 in our 3000lbs Camaro with the TH350 listed below and 4.11 gears
£2250
TH350 by TCI
Manual reverse pattern valve body
JW Ultra Bell in SFI
2400 stall torque converter.
£750
SBC 350 from 1974 Camaro
2 Bolt mains (we think)
Edelbrock Aluminium heads
Comp roller tipped rockers
Holley inlet
Holley 650 Vac Sec
HEI Distributor
GM starter motor
Stock long water pump
Stock Gen 2 Camaro oilpan
This engine came from a car, which we broke for spares, was running but little else known
£1500
Headers for 1967 Camaro SBC, wrapped, a bit knocked about, altered to suit angle plug heads £100
Copper radiator from 1967 Camaro SBC with cowl for 15” ish electric fan
£50
1974 Camaro 10 bolt axle
Open diff
3 something gears
All brakes complete
£150
Wolfrace Slot Mags
14” Chevy pattern
Set of 4
Fair tyres
£150
American Racing Daisy Mags
15” Chevy pattern
Set of 4
Rears fitted with MT Drag ET`s 28 x 10.5 wide plenty of RWYB left in them.
£300
Monoleaf springs for 1967 Camaro (used) with shackles
£100
Homemade ladder bars for 1967 Camaro with subframe connector frame (have photos of how it fitted my car)
£50
Koni Classic 1967 Camaro front shocks
60 runs
£40
Camaro rear drum brakes
12 bolt small ends mounting
Shoes relined
£50
1967 Camaro “A” arms top and bottom
Good ball joints
Energy Suspension Polybushed
Spindles for disc brakes
Standard ride height
£150
Blue Holley Pump
Well used
£20
Viewing preferred and can be anytime.
Call Simon Parker on 07980 294675 or email
simon.parker@fsmail.net
All plus carriage at cost or collect from Melton Mowbray Leicestershire.
Register
Login
FAQ
Search
