The Camaro Club (UK) http://classiccamaroclub.mfatw.com/ |
|
4th Gneration Camaro Drag Radial Build http://classiccamaroclub.mfatw.com/viewtopic.php?f=11&t=2291 |
Page 1 of 4 |
Author: | Jayce [Tue May 22, 2012 5:02 pm ] |
Post subject: | 4th Gneration Camaro Drag Radial Build |
Thought I'd show some pictures my Drag Radial Build. Camaro before build Rollcage and Mini tubbed: Rearend mocked up with BF Goodrich 315-60-15 tyres on a 10 x 15 rim space is a bit tight! May consider 275 option Engine with Procharger mocked up will need to adjust position of procharger once engine is in car. All I'm saying is it's a big small block. Will keep you posted. Cheers Jay |
Author: | neil.w [Tue May 22, 2012 11:22 pm ] |
Post subject: | Re: 4th Gneration Camaro Drag Radial Build |
Hi Jay looks to be coming togeather nice no flex in this baby, motor looks sweeeeeeet keep the pics coming mate Cheers Neil .P.S. What,ll the motor be putting out |
Author: | Jayce [Wed May 23, 2012 9:31 am ] |
Post subject: | Re: 4th Gneration Camaro Drag Radial Build |
Cheers Neil, BHP is unknown at this stage but I'm thinking of getting the engine dynoed. Will be happy with running 9's over the quarter mile Jay |
Author: | maudyZ28 [Wed May 23, 2012 3:42 pm ] |
Post subject: | Re: 4th Gneration Camaro Drag Radial Build |
its actually refreshing people doing this kind of work to 4th gens and not sticking with the old stuff. what made you go old school engine though ? is that what you know or had the engine and running gear already, as appose to building the LT motor ? |
Author: | chevy-stu [Wed May 23, 2012 6:30 pm ] |
Post subject: | Re: 4th Gneration Camaro Drag Radial Build |
This looks like an awesome car in the making.... procharged, Tubbed 4th gen... |
Author: | Jayce [Wed May 23, 2012 9:04 pm ] |
Post subject: | 4th Generation Camaro Drag Radial Build |
Thanks MaudyZ28 and Chevy-stu for the comments. Theres still alot of work to do. Would like it ready for mid 2013 all taxed & tested. I've been out to the states to watch the world street finals in orlando over the years and really like the Radial Classes so I'm trying to build my own version. I dont know of any other mini tubbed 4th generation over here! Would be good to see a few more. From the outset it was either going to be a traditional small block or LS motor as I ruled out a big block as I thought there may be issues with keeping it cool. Saying that I brought a complete BMR front end kit which includes the crossmember set up for both small and big block chevys. The kit also included a manual steering rack, lower A arms, coil overs and strange brakes. The kit should shave off 140lbs off the front end. Getting the procharger to fit in there is going to be interesting as the engine is so far back in these cars, the procharger needs to be moved from its current location. I think up and over the valve cover towards the manifold a bit more as it's looks like it may foul the strut tower. But will play with this once the engine is in the hole so to speak So now its on to the rear end which will be a Ford 9" with 35 spline shafts and locker. I'm using all the original OEM pick up points so most parts fit off the shelf. Will upload more pictures as the project progress. Cheers chaps Jay |
Author: | neil.w [Tue May 29, 2012 11:06 pm ] |
Post subject: | Re: 4th Gneration Camaro Drag Radial Build |
Keep the pics coming Cheers Neil |
Author: | Z28DUNC [Wed May 30, 2012 10:31 am ] |
Post subject: | Re: 4th Gneration Camaro Drag Radial Build |
Looks like your going to need a new bonnet with that engine underneath it! |
Author: | Jayce [Wed May 30, 2012 1:09 pm ] |
Post subject: | 4th Generation Camaro Drag Radial Build |
Your not wrong Dunc. Plan is to install the engine and see what needs to be cut. It's going to have a lightweight hood, I like the type that go right up to the windscreen and wrap around to the door mirrors. So will need to modify the wipers. Cheers Jay |
Author: | Rocky [Wed May 30, 2012 10:01 pm ] |
Post subject: | Re: 4th Gneration Camaro Drag Radial Build |
Looks like you got to one of grants meets from the pictures, Keep the pictures coming |
Page 1 of 4 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |