Hi guys my introduction to the club went to projects ? maybe the man upstairs new more abought the car than i did ??? When buying the car i knew the front floor pan needed a repair above the rear number plate inner rear wheel arches scabs on the bodywork and off side side skirt was damaged underneath and a full respray .After repairing above the rear numberplate i took off the offside sideskirt to repair the undrside as it was damaged, the rear of sill and inner rear wheel arch needed repair.After sorting them i then i looked at the sill although beeing pretty solid( it was painted with brushed on underseal )it didnt look right so i attacked it with the chipping hammer and it was as i thought so i cut it off refabed a new one (out of galvo sheet metal)and welded it on after drilling drain holes and holes to waxoyl at a later date.You could not see any of the rot with side skirt on and was solid underneath so would have past its next MOT .Not on my car ,Inner sills and box sections were rustproofed with Jenolite and weldthrough zink spray before sealing in .Then onto front inner wheel arch/footwell /back of batterie tray .Then onto side two this was worse with a repair to all of the above and a full front floor pan rather than just patching i cut out the full front pan,remade in galvo again, and not having a bead roller i made up some ribs and welded them underneath to give the panel strength .Also just infront of rear wheel arch needed cutting out and reparing, so basically all the crap is cut out, it just needs etch priming 2kprimer then spot in with 2kred and full underseal (so i can use the car).So here is the pics as promised
THATS Side one sorted ? the stuff that looks like chewy is an old tube of seam sealor.I wasnt going to through it out.
as I replied to that thread saying that I couldn't understand how I missed it Doh! Anyways, that's in the past & it's good to see you getting involved on here, thanks.
.I have posted some pics (must be an easyer way its took me an age !!!!!) i tried last night and just abought got them all on and the lot went off so i managed two get one pic on but hey ho ill stick with it im hoping to get more pics on but im going on a last minute hol on Thursday so we will give it another go tonight ? Cheers Neil 
its not the alumatub belly pan but it will do
Well thats about the size of it for now 
PS Enough Pics ??? 