The Camaro Club (UK) http://classiccamaroclub.mfatw.com/
2 or 3 Inch Cowl and a Rear Spoiler and Rear Window Lover! http://classiccamaroclub.mfatw.com/viewtopic.php?f=1&t=2400	Page 1 of 1

---

Author:	Dmrich [Mon Jul 16, 2012 12:59 pm ]
Post subject:	2 or 3 Inch Cowl and a Rear Spoiler and Rear Window Lover!
Thats what ive been after! Let me know please, been after these 4 ages, they aint gotta look pritty as im going for the Rat look. Cheers Rich

---

Author:	evilzee28 [Tue Jul 17, 2012 2:23 pm ]
Post subject:	Re: 2 or 3 Inch Cowl and a Rear Spoiler and Rear Window Lover!
Strange that you should post this up as I've just finished making a steel scoop for a good friend of mine to go on his P100 pick up truck. here's a couple of pics:- Making the side panels with the top & bottom edges formed into a radius After welding the sides on, the top was formed with a slight crease down the centre. I then folded a 15mm strip of metal to form a swage line to run down the centre of the bonnet. A little bit of filler to finish it off followed by some primer then some satin black to protect it until the truck goes for painting All in all a pretty straight forward job. The same procedure can be used to make this style of scoop for pretty much any bonnet cheers...Nige

---

Author:	78 Camaro [Wed Jul 18, 2012 1:02 pm ]
Post subject:	Re: 2 or 3 Inch Cowl and a Rear Spoiler and Rear Window Lover!
Blimey Nige that looks mint!! great job, he must be happy If he's got a pic of the car with this on would be great to see In conclusion DMrich- make your own custom stuff lol If you're goin for the rat look, friend showed me a line of paint that contains metal in it - not metal flake, but similar concept. The aim is that the metal in the paint will rust, so you can have solid metal underneath, primed etc, but it will be the metal in the topcoat that does the rusting. Cheers and good luck!

---

Page 1 of 1	All times are UTC
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/